Front Panel | Crate Amplifiers GTD15R specs

GTD15R Guitar Amplifier

The Front Panel:

1.INPUT: Use this jack to connect your guitar to the amplifier by means of a shield- ed instrument cable.

OVERDRIVE CHANNEL: A high gain channel giving you sounds from a slight edge to seri- ous overdrive.

2.GAIN: Use this control to adjust the amount of distortion for the Overdrive channel.

3.LEVEL: Use this control to adjust the out- put level of the Overdrive channel.

4.OVERDRIVE/CLEAN: Use this switch

to select the Overdrive or Clean channel. With the switch in the out position, the Clean channel is selected. When the switch is depressed, the Overdrive channel is selected.

CLEAN CHANNEL: A normal gain channel designed to give you crystal clear sounds to medium distortion.

5.VOL: Use this control to adjust the out- put level of the Clean channel.

6.LOW: This adjusts the bass frequencies. Use this control to get the best sounding bass response for your instrument.

7.MID: This adjusts the midrange frequen- cies. Use this control to get the best projec- tion and midrange tones for your instrument.

8.HIGH: This adjusts the treble frequen- cies. Use this control to attain a bright and lively sound for your instrument.

9.REV LEVEL: Use this control to adjust the level of the spring reverb effect.

10.CD INPUT: Use this 1/8" stereo mini jack to connect the output from a CD player, MP3 player, laptop, etc., to the amplifier. The signal at this jack is summed into a mono signal, which is sent to the internal

power amp circuit. Use the output level con- trol for the signal source to adjust the signal for the proper mix with your guitar.

Note: Depending on your CD player or other signal source device, you may need to use an adapter (i.e., two phono jacks to 1/8" stereo plug), available at most electronic outlets.

11.HEADPHONES: Use this 1/8" stereo jack to connect headphones to the amplifier. The internal speaker is disconnected when headphones are used.

Note: Depending on your headphones, you may need to use a stereo 1/8" plug to 1/4" jack headphone adapter, available at most electronic outlets.

CAUTION: To avoid possible damage to your hearing, do not use headphones for extend- ed periods of time at extremely loud levels.

12.SPEAKER: Use this jack to connect the amplifier to an external speaker. The internal speaker is disconnected when this jack is used. The impedance of the external speaker must be 4 ohms or greater.

WARNING: Do not attempt to use head- phones in the Speaker jack! Permanent hearing damage could result!

13.POWER: Use this switch to turn the ampli- fier on (top of the switch depressed) and off (bottom of the switch depressed). The switch illuminates when the amplifier is turned on.

14.POWER CORD (rear panel, not

shown): The grounded power cord should only be plugged into a grounded power out- let that meets all applicable electrical codes and is compatible with the voltage, power, and frequency requirements stated on the rear panel. Do not attempt to defeat the safety ground connection.

GTD15R specifications

The Crate Amplifiers GTD15R is a versatile and robust guitar amplifier that caters to both beginners and experienced players alike. Known for its excellent sound quality and user-friendly features, the GTD15R promises to elevate your guitar playing experience while providing a reliable performance in various settings, from small gigs to practice sessions.

One of the standout features of the GTD15R is its power. With 15 watts of output, it offers ample volume for practice and smaller venues without compromising sound quality. The amp is equipped with a 8-inch speaker that delivers a rich and vibrant tonal range. The speaker is crucial for producing the natural warmth and presence that guitarists crave, ensuring that every chord and note resonates with clarity.

The GTD15R features a two-channel design, allowing players to switch between clean and overdrive modes seamlessly. This flexibility permits a diverse range of tones, making it suitable for various musical genres, from blues to rock and even jazz. The clean channel provides a pristine, uncolored sound that lets the guitar's natural tone shine, while the overdrive channel delivers a gritty, saturated sound perfect for those seeking a more aggressive edge.

In addition to its channels, the GTD15R is equipped with a three-band EQ (bass, mid, and treble), giving users the ability to sculpt their sound precisely. This enables customization of tonal characteristics, allowing players to dial in their preferred sound profile for different styles or playing environments.

The amplifier also features built-in reverb, adding depth to your sound without the need for additional effects pedals. The reverb can enhance performance by creating a sense of space and ambiance, making the GTD15R ideal for both live performances and studio recordings.

Portability is another key characteristic of the GTD15R. Its lightweight design makes it easy to transport, while the durable construction ensures that it can withstand the rigors of travel. This makes it a perfect companion for musicians on the go.

In terms of connectivity, the GTD15R comes equipped with an auxiliary input, allowing musicians to play along with their favorite tracks or practice with backing tracks. Additionally, it features a headphone output for silent practice, ensuring you can refine your skills without disturbing those around you.

In summary, the Crate Amplifiers GTD15R combines power, versatility, and portability, making it an excellent choice for guitarists of all skill levels. With its thoughtful design and sound-driven features, it stands out as a reliable amplifier that encourages creativity and musical expression.