L C D
M O D U L E
L C D
R E M O V A L
Disassembly Procedure
LCD Module
The illustrations below show how to remove and disassemble the LCD module. The module contains LCD panel, Inverter board, LCD Hinge bracket, Hinge cover, LCD front cover, LCD back cover
Removing LCD Module
1. Remove 6 rubber pads and 6 screws (M2.5 x 4L) from LCD module.
M2.5*4L
2.Prying the inside edges of the top front bezel, then separate it from LCD back cover and take LCD front bezel away.
3.Disconnect the cable and remove 1 screw then take away Inverter board and disconnect the LCD cable.
2 - 10