Powering on your Eee PC
These are only quick instructions for using your Eee PC.
1. Install the battery pack | 2. Connect the AC power |
| adapter |
2 | 3 |
| |
| 1 |
3.Turn ON the Eee PC
Damage may occur if you use a different adapter to power the Eee PC.You may damage both your battery pack(s) and the Eee PC with a faulty AC- DC adapter.
•When you open the display panel, do not force it down to the table or else the hinges may break! Never lift the Eee PC by the display panel!
•Only use battery packs and power adapters supplied with this Eee PC or specifically approved by the manufacturer or retailer for use with this model or else damage may occur to the Eee PC.The input voltage range between the wall outlet and this adapter is AC 100V~240V, and the output voltage of this adapter is +19Vdc, 2.1A.
•Never attempt to remove the battery pack while the Eee PC is turned ON, as this may result in the loss of working data.
Remember to fully charge the battery before first use and whenever it is depleted to prolong battery life.
Chapter 2: Getting Started |