The ADSL Modem “Link” light is ON (steady and not blinking) and means Internet access is possible, but I still cannot browse the Internet.
•Restart your computer.
•Check if the WAN LED on the wireless router is on.
•Check the wireless encryption settings.
•Check if the computer can get an IP address (using both a wired or wireless connection).
•Check that your web browser is configured to use the local LAN and is not configured to use a proxy server.
If the ADSL “LINK” light blinks continuously or stays off, Internet access is not possible - the Router is unable to establish a connection with the ADSL network.
•Ensure that all your cables are properly connected .
•Disconnect the power cord from the ADSL or cable modem, wait a few minutes, then reconnect the cord.
•If the ADSL light continues to blink or stays OFF, contact your Internet service provider.
Network name or encryption keys are forgotten.
•Set up a wired connection and reconfigure the wireless security settings.
•Press the Reset button at the rear panel of the wireless router for more than five seconds.
46