Firmware Restoration
Firmware Restoration is used on an ASUS Wireless Router that failed during its firmware upgrading process. It uploads the firmware that you specify.The process takes about three to four minutes.
IMPORTANT: Launch the rescue mode before using the Firmware Restoration utility.
To launch the rescue mode and use the Firmware Restoration utility:
1.Unplug the wireless router from the power source.
2.Hold the Reset button at the rear panel and simultaneously
3.Use the following to set up your TCP/IP settings: IP address: 192.168.1.x
Subnet mask: 255.255.255.0
4.From your computer’s desktop, click
Start > All Programs > ASUS Utility
47