DRAFT 2 12/17/12
DRAFT 2 12/17/12
Using your LED projector for the first time
Refer to the following steps when using your LED projector for the first time.
1.Set up your LED projector then press the power button. Wait for a few minutes until the ASUS welcome screen appears.
2.Using the control panel buttons, select the language for your LED projector.
3.In the Direct Mode control panel grid, select either Normal Mode or Demo Mode.
•Normal Mode - Selecting this mode proceeds you to scan connected input devices with the LED projector.
•Demo Mode - This mode allows you to view the demo video that comes with your LED projector.
34 | LED projector |