Chapter 7 Troubleshooting
If none of the following suggested solutions solves the problem, call your dealer or your service center.
Problem 1: No picture from the Camera.
Solution -
1.Wait a few seconds, press desired source selector again.
2.Press a different source, then
3.Check if the power is turned on. (Is the Pilot Light On?)
4.Make sure the document or object is positioned under the camera
5.If in USB operation disconnection and then reconnect the USB Cable.
Problem 2: Cannot Focus, camera will not focus properly.
Solution - To properly focus: Move Camera head further away from object. Focus and then move toward the object while pressing the auto focus button
Problem 3: Image is too bright or dark. The desired part of the image can not be seen because it is too bright or dark.
Solution – Adjust the brightness “BRT+/- “ Control Button on the remote control.
*The updated information will be regularly released on the Dukane web site, please visit our web site http://www.dukcorp.com/av.
32