Dell 4.4 manual System Utilities And Supported Files For Linux

Toolkit Components	Purpose
sysdrmk.exe	Used by UPINIT.BAT to patch the boot sector and Master Boot Record
	(MBR).
config.ini	Configuration file used by raidcfg.exe.
	CAUTION: Do not edit this file. Incorrect edits might cause
	raidcfg.exe to fail.
stsvc.ini	Configuration file used by raidcfg.exe.
	CAUTION: Do not edit this file. Incorrect edits might cause
	raidcfg.exe to fail.
sys.ini	Configuration file used by DTK for deployment.
IDRAC	Configures iDRAC 6.
	NOTE: This feature may not be supported on all systems.
IDRAC7	Configures iDRAC 7.
	NOTE: This feature may not be supported on all systems.
RAC 4	Configures Dell Remote Access Controller (DRAC) 4/P and DRAC 4/I.
RAC 5	Configures DRAC 5/iDRAC.
pci.ids	Reports PCI devices when used with syscfg.exe.
disclaimer.txt	Displays the disclaimer for the tools.
RaidcfgErrorCodes.txt	Lists the error codes and messages for the raidcfg.exe tool.
SyscfgErrorCodes.txt	Lists the error codes and messages for the syscfg.exe tool.

System Utilities And Supported Files For Linux

The following table lists the files, located at /opt/dell/toolkit/bin and the supporting libraries located

in /opt/dell/toolkit/lib on systems running the Linux operating system. These are the core tools (utilities) that perform pre-operating system configuration and deployment tasks. See the Dell OpenManage Deployment Toolkit Command Line Interface Reference Guide at dell.com/openmanagemanuals for complete information about the capabilities of each DTK utility.

Toolkit Components	Purpose
pci.ids	Used with syscfg to report PCI devices.
racadm	Wrapper script, which invokes racadm4, racadm5, or racadm6
	depending on the Remote Access Controller (RAC) on your system.
racadm4	Configures DRAC 4/P and DRAC 4/I RACs.
racadm5	Configures DRAC 5 RACs.
racadm6	Configures iDRAC 6.
	NOTE: This feature may not be supported on all systems.
racadm7	Configures iDRAC 7.
raidcfg	Creates and reports RAID information.

27