Apple quicktimeconferencing manual Installing the H.320 card, Power Macintosh 8100AV

Page 4

Installing the H.320 card

The H.320 card is installed in your computer by an authorized service representative. In general, it is not recommended that you remove the card. However, if the card needs to be reinstalled, follow these steps:

1Refer to the manual that came with your computer. Locate the chapter that explains how to install an expansion card. Follow the instructions carefully to remove the computer’s cover and install the card. (See the illustrations on the following pages.)

Do not replace the computer’s cover.

2Plug the connector at the end of the H.320 card’s ribbon cable into the computer’s DAV port. (The illustrations that follow show the card installed in each model of computer.)

DAV connector

Ribbon cable

H.320 card

Power Macintosh 8100AV

Image 4

Contents 320/ISDN Installing the H.320 Expansion Card and Software What’s in this booklet 320 software on the QuickTime Conferencing H.320/ISDN diskInstalling the H.320 card Power Macintosh 8100AVPower Macintosh 7100AV Macintosh Quadra 840AV Replace the computer’s coverPlugging in the handset and Isdn line Macintosh Quadra 840 AV Plug the other end of the Isdn line into an Isdn wall jackDouble-click the Installer icon to open it Installing the softwareWhen installation is complete, click Restart Opening Apple Media Conference FCC statement Radio and television interferenceDOC statement Vcci statementApple Computer, Inc