CCTV IP Network Video Technical Brief NBC 255W and 265W Wireless Connections | 1 |
|
|
NBC 255-W and 265-W Wireless Connection Guide
Objective: This wireless connection guide is designed to assist with establishing wireless connectivity between typical commercially available wireless routers and Bosch NBC
Minimum prerequisites prior to starting:
•The NBC Camera should be assembled as per the directions of the quick installation guide provided with the camera o Wireless antenna is attached
o SD card is installed
o Power adapter is connected to the camera
•Bosch Video Client and Configuration Manager software should be installed on your PC
•A physical Ethernet connection to the camera established
•Access to an 802.11 B, G, or backwards compatible N wireless router
oNOTE: If using an 802.11N router, review the manufacturer’s specifications for compatibility with 802.11G products. If the router is not backwards compatible it will not communicate with the camera.
Step 1: Assigning an IP address to the NBC Camera The first step in establishing wireless communications is to assign a static IP address to the NBC camera. Open the Configuration Manager application on your PC.
•Once the program is opened you should see the NBC camera appear in the “Network” column as shown. By default all Bosch encoders and network cameras come with a factory default IP address of 192.168.0.1.
•Manual Assignment: You can assign an IP address manually or by using the Configuration Wizard. We will cover the manual method first. Simply
•Once the “Network settings” menu is open enter valid IP address information for the desired network and select “OK”. After selecting “OK: the camera will reboot.
o NOTE: Most
Bosch Security Systems, Inc. 800.289.0096 www.boschsecurity.us