Allied Telesis AT-6102 manual Installation, Specifications

Chapter 2

Installation

To install the Power over Ethernet Splitter, please follow the following steps in this exact order:

1.Select on the POE Splitter an output Voltage compatible with the device to be powered. Be aware that Voltage DIP switch is factory set on 5V. When you change voltage by DIP switching to different voltage, the Power over Ethernet Splitter must be in power off status.

2.Connect the Data In port on the Power over Ethernet Splitter to a PoE capable LAN Switch or to the Data Out port of a POE Injector.

3.Choose the power cable (Internal Diameter 2.0mm or 2.5mm) and plug it into the Power Out port on the Power over Ethernet Splitter.

4.Plug in the other end of the PoE Splitter’s power cable to the device to be powered (Access Point, VoIP Phone, IP Camera …).

5.Connect the Data Out RJ-45 plug of the PoE Splitter to the powered device (Access Point, VoIP Phone, IP Camera, …)

Specifications
	IEEE802.3 10BASE-T
Standard	IEEE802.3u 100BASE-TX
	IEEE802.3af Power over Ethernet
Power jack diameter	2 power cables with straight plug
	Plug dimensions: 5.5 x 2.0mm, 5.5 x 2.5mm length 360mm each
Adjust Switch	4 segments switch for output voltage select.
Data In & Power In	Data and Power in pin usage :
	Power : 4 & 5(V+), 7 & 8 (V-) ; 1,&2(V+), 3&6(V-)
Connector
	Data :1 & 2, 3 & 6
Data Out Connector	Data only out: 1 x RJ-45, Data pin 1,2,3,6
	Power out jack: 5V, 7.5V, 9V, 12V (User Adjustable)
Power Out Connector	Maximum feeding current: 2.0A@5V
	Maximum output power: 10W
	10BASE-T: 2 or 4-pair UTP/STP Cat.3, 4,5 cable EIA/TIA-568 100-ohm
Network Cables	(100m)
	100BASE-TX: 2 or 4-pair UTP/STP Cat.5 cable EIA/TIA-568 100-ohm
	(100m)
LED	System: power (green)
Power Input	DC 48V
Operating conditions	Temperature Range: 0°C~ 40°C
	Humidity: 90% (non-condensing)
Storage conditions	Temperature Range: 0°C~ 70°C
	Humidity: 90% (non-condensing)
Dimension	80mm x 55mm x 26mm (L x W x H) (main device only)
EMI & Safety	CE, FCC, UL, GOST, C-Tick
certifications
Other Certifications /	WEEE, RoHS
Markings

AT-6102 Installation and User Guide 8