SINGLE/DUAL RACKMOUNT KITS
Dual-Unit Installation
The components that you’ll use for
1.Attach a bracket to each of the units’ cases (one bracket to one unit’s left side, one to the other unit’s right side) using two of the included screws and flatwashers. Insert the screws in the two front holes on the units’ sides. (Nuts are already in place, mounted on the side walls inside the unit.)
2.Attach a rail to each of the unit’s cases (one rail to one unit’s right side, the other rail to the other unit’s left side) by inserting four of the included screws and flatwashers in the case’s four side holes. These rails must be attached “opposingly,” so that the narrow flange of one rail faces the wide flange of the other.
Attaching the RM523’s short bracket and side rail.
3.Fasten the two units together by sliding one of the rails into the other.
4.Cover the ends of the joined rails with the included plastic caps in order to protect the rail ends and keep the rails from sliding.
Fastening the two units together.
After you finish this assembly, the units are ready for mounting. Fasten the brackets to the side rails of your 19" rack with four screws, cage nuts, etc. (These aren’t included in the Kit.)
© Copyright 2000. Black Box Corporation. All rights reserved.
CUSTOMER | Order | |
SUPPORT | FREE technical support 24 hours a day, 7 days a week: Call | |
INFORMATION | Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA | |
Web site: www.blackbox.com • | ||
|
BLACK BOX and the 
logo are registered trademarks of Black Box Corporation. Any other trademarks in this document are the property of their owners.