Model AC603A
1. Introduction
1.1 General
The AC603A extends video + phantom power over UTP (Cat5/5e/6) cable up to 500 feet. The unit has a local output port on an HD15 connector. The AC603A can support the following video signals
PC’s VGA video (RGBHV) at any resolution
Component video (Y Pb Pr, or RGB), at any resolution - an adapter cable
NTSC, PAL, or SECAM Composite video and stereo audio
At the receiving (remote) end the Cat5 signal is converted back to VGA for connection to monitors, projector or other display devices using a compatible unit (Black Box Model AC602A).
The AC603A includes a power supply that powers itself and the AC602A Receiver (phantom power) for a clean and easy setup (note that if the length of Cat5 cable is longer than 300 feet, the receiver may require its own power supply). Alternatively, the power supply can be connected to the AC602A remote receiver, in which case, the sender is powered through the cat5 cable.
1.2 Features
•Local VGA port available for local display
•Differential signaling eliminates ground loops and noise
•Handles resolutions up to 1600x1200 at any refresh rate
•Rugged, Reliable, Compact size
•Only one end requires power in most applications. Power supply can be connected at the sending or the receiving end, whichever is convenient.
•Drive standard CAT5 cables to 500 feet (for VGA and Component Video) or to 1200 feet (for Composite Video + Audio)
4 |