Chapter 3: Hardware Installation
3. Hardware Installation
1.Connect the transmitter to your DVI source (PC).
2.Connect the transmitter to your serial controlled device.
3.Connect the receiver to the remote DVI monitor.
4.Connect the receiver to the serial control device or monitor.
5.Make sure your CAT5/5e/6 cable is tightly connected and not loose.
6.High quality PC video displays on the screen.
Audio
cable
PC
DVI cable
Audio
XR Extender cable Transmitter
Speakers
DVI cable
Flat panel
display
XR Extender
Receiver
CAT5/5e/6
cable
Figure 3-1. Connection diagram.
Page 15 |