Cisco Systems CGR1120K9 manual Enabling an Interface, Additional WiMAX Configuration Commands

Page 21

Configuring the Module

Note *—The command, pkm trustpoint device device_cert_trustpoint, is not needed if 1) EAP-TLS is using the embedded Airspan certificate, or 2) if EAP-TTLS is used.

Enabling an Interface

To configure a WiMAX interface, issue the following commands:

Router# configure terminal

Router(config)# interface wimax 2/1

Router(config-if)# shutdown

Router(config-if)# no shutdown

Router(config-if)# end

Router#

Additional WiMAX Configuration Commands

The following are the WiMAX configuration commands:

•(config)# wimax scan-list scan_list_name

•(config-scan-list)#nap id nap-id priority priority channel-index channel-index

•(config-scan-list)#nsp id nsp-id {home priority priority channel-index channel-index}

•(config-if)# [no] wimax pkm-version {pkm-v2}

•(config-if)# [no] shutdown

•(config-if)# [no] ip address {IP_address_in_format_i.i.i.i IP_prefix_and_network_mask_length_in_format_x.x.x.x/m IP_network_mask_in_format_m.m.m.m}

WiMAX show Command Examples

The following are WiMAX related show commands:

•show sprom, page 21

•show interfaces wimax interface_name association, page 22

•show controllers wimax interface_name, page 22

•show interfaces wimax interface_name statistics, page 23

•show interface wimax interface_name scanning, page 23

show sprom

To show the command options for the show sprom command, do the following:

Router# show sprom ?

 

all

Show all sproms contents

 

backplane

Show

backplane

clock

module sprom contents

 

clock

Show

backplane

clock

module sprom contents

 

 

Cisco Connected Grid Modules for CGR 1000 Series—WiMAX Installation and Configuration Guide

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OL-26236-03

 

 

 

 

 

21

 

 

 

 

 

 

 

 

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Cisco Connected Grid Modules for Cisco Part Number Description Parts ListParts List Feature Description FeaturesFEC Hardware OverviewFront Panel QMAf connectorANT-WM-INT-OUT-M Supported Cisco WiMAX AntennasWiMAX Interface Mechanical SpecificationsState Description Module StatesTemperature Monitoring State Machine DC Power ConsumptionModule Power States Radio Frequency InterfaceInstalling and Removing the WiMAX Module Before You Begin InstallationInstallation Warning Statements Removing the WiMAX Module Installing the WiMAX ModuleRegulatory and Compliance Information StandardsSoftware Overview WiMAX OverviewQoS Support WiMAX Link QoSQoS Output 8091 1026 DataCID QoS Parameters Additional QoS Commands Configuring the ModulePrerequisites Guidelines and LimitationsWiMAX X.509 Certificates WiMAX Interface SecurityRouterconfig-if#pkm auth-method eap-ttls EAP-TLS and EAP-TTLS Authentication MethodsWiMAX Scan-list Configuration WiMAX Interface ConfigurationEnable Security Parameters WiMAX show Command Examples Additional WiMAX Configuration CommandsEnabling an Interface Show spromShow controllers wimax interfacename Show interfaces wimax interfacename associationRouter # show interface wimax 3/1 association Router # show controllers wimax 6/1Show interfaces wimax interfacename statistics Troubleshooting and DiagnosticsShow interface wimax interfacename scanning Router # show interface wimax 3/1 scanningWiMAX Debug Commands Checking Signal StrengthRetrieving the Electronic Serial Number VID Converting Hexadecimal ESN to Decimal NotationLightning Arrestor for the Cisco 1240 Connected Grid Router Additional ReferencesCisco System Software Commands Documents Feature HistoryRegulatory, Compliance, and Safety Information Release Feature InformationConnected Grid Documentation Feedback Form Technical Assistance Tell Us What You Think

CGR1120K9 specifications

Cisco Systems CGR1120K9 is a robust networking device designed specifically for the Internet of Things (IoT) and industrial applications. As a part of the Cisco Connected Grid Router series, the CGR1120K9 delivers reliable connectivity and supports various networking functionalities to enhance operational efficiency in challenging environments.

One of the prominent features of the CGR1120K9 is its rugged design, built to withstand harsh conditions typical in industrial settings. With an operating temperature range of -40 to +85 degrees Celsius, it is ideal for use in outdoor and remote locations, making it suitable for utilities, transportation, and critical infrastructure industries. Its compact form factor allows for flexible installation options, which is crucial in space-constrained environments.

The CGR1120K9 comes equipped with a range of interfaces, including Ethernet ports and serial interfaces, providing versatility in integrating with different devices and systems. It supports both wired and wireless connections, enabling seamless communication across the IoT landscape. Additionally, the router features a dedicated management interface for simplified configuration and monitoring, ensuring that network administrators can efficiently manage their deployments.

In terms of performance, the CGR1120K9 features advanced routing and security capabilities, including support for IPv6, virtual private networks (VPNs), and firewall functionalities. This ensures secure data transmission over the network while maintaining high-performance levels essential for real-time applications. The device is powered by Cisco's IOS XE software, which offers enhanced operational capabilities through advanced features such as software-defined networking (SDN) and automation.

Another key characteristic of the CGR1120K9 is its scalability. Organizations can easily expand their networks as their needs evolve, ensuring an investment that grows with them. The router is designed to work cost-effectively in both small and large-scale deployments, making it a flexible choice for various business environments.

The CGR1120K9 also supports a range of protocols and standards, ensuring compatibility with existing infrastructure and devices. This is crucial for organizations seeking to modernize their networks while leveraging existing investments in hardware and software.

In conclusion, the Cisco Systems CGR1120K9 stands out as a high-performance, rugged router tailored for the demands of IoT and industrial applications. With its robust features, advanced technologies, and characteristics, it empowers organizations to enhance connectivity and streamline operations in even the most challenging environments.
Top Page Image Contents