Lathem 1000E manual Setting the Display Format, Setting the Time

Page 7

SETTING THE DISPLAY FORMAT

SETTING THE TIME

Example: Change the time from 10:08 to 10:09.

Second	Hour	Minute
	TIME

SELECT

CHANGE

SET

TIME

SELECT

CHANGE

SET

TIME

SELECT

CHANGE

SET

Step 1

Press the SELECT button and position the " " mark at the "TIME".

At that moment, the "Hour" flashes. (The flashing means it can be changed.)

Change the "Hour".

In case of the example, press the SET button because the hour is not to be changed.

At that moment, the flashing changes from "Hour" to "Minute".

Step 2

Change the "Minute".

Press the CHANGE button to set at "09", and then press the SET button.

At that moment, the "Second" starts to run from "00".

Step 3

MO TU WE TH FR SA SU

After you finish setting the time, press the SET button once again.

Now the time setting has been completed. Replace the cover and lock.

IMPORTANT: If you do not complete

Step 3, the clock will not print.

5

Image 7

Contents Lathem Time Corporation Lathem Time Corporation Features Configuration Before Using the Time ClockQuick Easy Setup Function of 3 control buttons HOW to Program the ClockSetting the Time Setting the Display FormatChange the Year Setting the DateSetting the 12/24 Hour Setting the Print Order Setting the Year Digit Setting the Print StyleSetting the HOUR/MIN Setting the Leading Zero Setting the Comment Portuguese Setting the LanguageChange the Print Direction Setting the Print MethodChange the Print Activation Setting the Starting Date of Daylight Saving Time Setting the Daylight Saving TimeSetting the Ending Date of Daylight Saving Time Deleting the Daylight Saving Time Setting Registering the Password Setting the PasswordHOW to Change Setting When the Password is SET Canceling the Password Password Select Change SET Resetting Wall Wall MountingReplacing the Ribbon Cassette Print head Ribbon mask Ribbon Other Failures TroubleshootingSpecifications Limited One-Year Warranty Manufacturers Warranty