Casio DT-X11 Series, handheld terminals manual Safety Battery Pack/Memory Backup Battery

Page 49

7.2 Safety

7.2.1 Battery Pack/Memory Backup Battery

Battery Pack

•Never disassemble or retrofit the battery pack. The battery pack has safety mechanism and protection means incorporated to avoid hazards. Should they be damaged, the battery pack could become hot, generate smoke, explode, or ignite.

•Never contact the “+” and “-“ terminals with a metal object such as wire. Also, do not carry or store the battery with a metal case. Otherwise, the battery pack may be short-circuited resulting in an excessive current and causing the battery pack to become hot, smoke, explode, or catch fire.

•Neither dispose of the battery pack into a fire nor heat it. The insulation may be burnt, the gas exhaust valve or safety mechanism may be damaged, or the internal electrolyte may ignite, causing the battery pack to become hot, smoke, explode, or ignite.

•Neither leave nor use the battery pack in a place with a high temperature (over 80°C) or close to a fire or hot stove. Should the resin separator be damaged due to excessive heat, the battery pack may be short-circuited causing it to become heated, smoke, explode, or ignite.

•Do not soak the battery pack in fresh water or sea water. If the protection means incorporated in the battery pack are damaged, the battery pack may become hot, smoke, explode, or ignite.

•Do not attempt to charge the battery pack close to a fire, in direct sunlight, or in a car parked in the sun. A heated battery pack will trigger the internal hazard protection means to stop the charging function. Or, the protection means may be damaged and the battery may be charged with an excessive current or voltage, or have abnormal chemical reactions induced to cause it to become hot, smoke, explode, or ignite.

•Do not stick a pin or nail in the battery pack. Neither hit it with a hammer nor stamp on it. If this is done, the battery pack may be broken or deformed resulting in a short circuit and causing it to become hot, smoke, explode, or ignite.

•Do not hit or throw the battery pack. If the protection means incorporated in the battery pack are damaged, the battery pack may be charged with an excessive current or voltage, or have abnormal chemical reactions induced to cause it to become hot, smoke, explode, or ignite.

•Never use a battery pack that is significantly damaged or deformed. It may become hot, smoke, explosion, or ignite.

•Do not attempt to solder anything directly on the battery pack surface. The insulation may be damaged or the gas exhaust valve or safety mechanism may be damaged, causing the battery pack to become hot, smoke, explode, or ignite.

•Do not use the battery pack in other devices than the specified products by CASIO. The performance or service life of it may be reduced or abnormal current may flow to cause it to become hot, smoke, explode, or ignite.

•When charging the battery pack with battery charger or cradle use only the dedicated AC adaptor supplied from CASIO, at a temperature between 0°C and 40°C. If the battery pack is charged with chargers or cradles other than those specified by CASIO, it may be over-charged, or charged with an excessive current, or have abnormal chemical reactions induced, causing it to become hot, smoke, explode, or ignite.

49

Page 48 Page 50
Image 49
Page 48 Page 50
Contents DT-X11 Series Hardware Manual Table of Contents HA-A20BAT/DT-5025LBAT Editorial Record Preface Incorporates .NET technology Overview of the Products FeaturesPage Available Models DT-892TCV DT-893LTCV Options and InterfacesGeneral Guide 1.3.1 DT-X11 Function Keys 2 DT-167CHGE Car Mounted Battery Charger Names of parts Description USB Port 3 DT-160IOE Bridge Satellite CradleName Description Wall Mount 4 DT-169CHGE Cradle-type Battery Charger 5 DT-5022CHG Dual Battery Charger From Hardware Specifications DT-X11EAN8/JAN8, EAN13/JAN13, Upca ISM DT-160IOE Bridge Satellite Cradle PowerUSB GNDApprox .0 hours For OFF DT-167CHGE Car Mounted Battery ChargerDT-169CHGE Cradle-type Battery Charger DIP Switch Setting for DT-160IOE LED Status Indication with LEDsLED OFF DC16V DT-5022CHG Dual Battery ChargerBattery Charge Block Page HA-A20BAT/DT-5025LBAT DT-894CFU CF Card Extension Unit Interfaces DT-X11 MIR FIRSIR HA-A20BAT/DT-5025LBATPage Reserved by the manufacturer Product Identification and Reference NumbersEnvironmental Performances DT-X11 Quality ReferencesDT-160IOE/DT-169CHGE 4 DT-5022CHG DT-167CHGEHA-A20BAT/DT-5025LBAT 6 DT-894CFU 2 DT-160IOE/DT-169CHGE Electrical Performances DT-X113 DT-167CHGE 6 DT-894CFU CF Card Extension Unit DT-5022CHG Mechanical Performances DT-X115 DT-894CFU CF Card Extension Unit Mtbf Reliability DT-X11MIL-HDBK217F 3 DT-5022CHGCompliance DT-X11 Length 1 meter or less Cable Specifications For Chain Connection and Short LengthXxxxxxx For Chain Connection and Long LengthPrecautions for short-term storage 1 to 2 days period Precautions HandlingBattery Pack Safety Battery Pack/Memory Backup BatteryMemory Backup Battery General
Related manuals
Manual 61 pages 34.18 Kb

DT-X11 Series, handheld terminals specifications

The Casio DT-X11 Series represents a remarkable line of handheld terminals designed to meet the needs of various industries, including retail, logistics, and manufacturing. Known for their robust performance and user-friendly interface, these devices have become a favorite among businesses seeking to enhance their operational efficiency.

One of the standout features of the DT-X11 series is its exceptional durability. Built to withstand the rigors of demanding work environments, these terminals are compliant with IP54 standards, making them resistant to dust and water splashes. Additionally, they can endure drops from a height of up to 1.5 meters, ensuring reliability in tough conditions.

The DT-X11 series is powered by a high-performance processor, which facilitates fast data processing and seamless multitasking. This efficiency is complemented by a generous memory capacity, allowing users to run complex applications and store large amounts of data without experiencing slowdowns.

Another key characteristic is the device's display. The DT-X11 series features a high-resolution, daylight-readable screen that ensures clear visibility even in bright conditions. This capability is vital for field operations, where workers must read labels, scan barcodes, or access information outdoors.

Connectivity is a strong suit of the Casio DT-X11 series. Equipped with advanced wireless technologies including Wi-Fi and Bluetooth, these terminals enable real-time data transfer. This connectivity enhances communication between team members and systems, promoting streamlined operations and improved decision-making.

The DT-X11 series also excels in scanning capabilities. With an integrated high-performance imager, it can read various barcode types quickly and accurately. This reliability is essential for inventory management, point-of-sale transactions, and logistics applications, where timely and precise data capture is crucial.

In terms of ergonomics, the design of the DT-X11 series considers the user experience. Its lightweight build and comfortable grip reduce user fatigue during prolonged usage. The touchscreen interface, combined with physical buttons, provides versatility in input methods, catering to different user preferences and environments.

Battery life is another highlight, as the DT-X11 series is equipped with a long-lasting battery that supports extended operations without frequent recharging. Users can confidently engage in full-day tasks without the worry of losing power mid-operation.

In summary, the Casio DT-X11 Series offers a potent combination of durability, performance, connectivity, and user-friendliness. These handheld terminals are designed to empower businesses with the tools they need to improve efficiency and accuracy in their operations, making them an excellent investment for industries that rely on mobile data capture.
Top Page Image Contents