Casio SE-S300M manual Setup up Minimum Stock on all PLU’s, Adding stock to PLU Numbers

Setup up Minimum Stock on all PLU’s

1.Turn Mode Key to PGM

2.Enter 3 – Sub Total

3.Enter 99000004 and press subtotal (range programming for PLU’s)

4.Enter 1466 press subtotal

5.Enter plu start range no. and press ca/amt tend (press ca/amt tend before entering a number to skip this step)

6.Enter plu end range no. and press ca/amt tend (press ca/amt tend before entering a number to skip this step, if you were to skip both steps this will automatically select all PLU’s in the system)

7.Enter 1000 – Cash – Sub Total

Adding stock to PLU Numbers

1.Turn mode switch to X Mode

2.Enter 2 and press subtotal

3.Enter PLU No and then press PLU Key,

4.Enter stock amount for example enter 100 now press CA/AMT

5.Press Subtotal

Subtract stock to PLU Numbers

1.Turn mode switch to X Mode

2.Enter 2 and press subtotal

3.Enter PLU No and then press PLU Key

4.Press RF (Refund)

5.Enter stock amount for example enter 100 now press CA/AMT

6.Press Subtotal

Input New stock to PLU Numbers

1.Turn mode switch to X Mode

2.Enter 8 and press subtotal

3.Enter PLU No and then press PLU Key,

4.Enter stock amount for example enter 100 now press CA/AMT

5.Press Subtotal

Take a Stock Report

1.Turn mode switch to x mode

2.Enter 64 & press Cash

3.Turn mode Switch to Reg Mode This will give a stock on hand report