Installing the computer
•Before installing a computer to the docking station, make sure to disconnect all the cables connected to the computer.
•Installing and separating the stand dock after turning the computer off is recommended.
1Insert your finger into the groove on the side of the stand dock to open the top cover of the stand dock.
English
2Align the computer connector and the stand dock port at the bottom of the computer and connect them.
3Connect the computer’s AC adapter to the stand dock.
•Make sure that you should use the 2.5 Pi(Φ) ATIV Smart PC or ATIV Smart PC Pro adapter.
•You can also use the stand dock using only the battery power of the computer.
•If the computer doesn't work after being connected with the docking station, this may be due to poor contact caused by a foreign substance. Check and remove any substance on the connection.
7