Belkin AP21300-12 user manual Step Remote AC Operation

Page 9

Hookup and Installation

Step 2

Remote AC Operation

This function allows you to turn your Power Console on and off via your preamplifier or receiver equipped with a switched AC power outlet.

Note: You cannot turn off the switched outlets on the Power Console with the switched button on the front of the unit when there is any external power signal supplied to either the AC or DC remote inputs.

To install the Remote AC Control Cable:

A. Plug the female end of the included Remote AC Control Cable into the “Remote AC IN” outlet located on the back of the Power Console. (Fig. 2a)

B.Press the “Remote” button on the front of the Power Console to turn on the remote function. The LCD display should read “REMOTE ON”. (Fig. 2b)

C.Press the “Switched” button on the front of the Power Console to turn off the switched outlets.

D.Connect the 2-pronged male end of the Remote AC Control Cable into a switched power outlet on a preamplifier or receiver. When you turn on the receiver or preamplifier, the outlets on the Power Console that are programmed as “Switched” will be turned on immediately and the “Switched/ Delayed” outlets will come on after an 8 second delay.

PureAV Power Console

Figure 2a

Figure 2b

8

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Clear Picture Table of Contents Introduction Safety Precautions Package Contents Power Console Features Power Console Features Optional Mounting your Power Console Hookup and InstallationStep Remote AC Operation Step Remote DC Operation Step Connect Digital Components to the Digital Filter Step Connect Video Components to the Video Filter Step Connect Audio Components to Audio Filter Step Connect High-Current Audio Filter 8 second delay Step Connect your Pay-Per-View/Phone Line Step Connect your Coaxial-Cables/DSS Lines Step Connect your Broadband Ethernet Line Central LCD Control Panel OperationAuxiliary Power Outlet Power Console is not providing power TroubleshootingCross-Wired indicator is lit Ground Fault indicator is litGlossary of Power Terms Belkin Connected Equipment Warranty Belkin Connected Equipment Warranty Belkin Corporation, 501 W. Walnut St., Compton CA PureAV Power Console PureAV Power Console Belkin Corporation West Walnut Street

AP21300-12 specifications

The Belkin AP21300-12 is a cutting-edge access point designed to enhance wireless network performance and coverage in various environments. With an emphasis on providing robust connectivity for both personal and professional use, this device embodies Belkin's commitment to quality and innovation in networking technology.

At its core, the AP21300-12 supports the latest Wi-Fi 6 (802.11ax) standard, which significantly improves data throughput and overall network efficiency. With dual-band capabilities, it operates on both the 2.4 GHz and 5 GHz frequency bands, allowing it to effectively manage a wide range of devices simultaneously without sacrificing speed. This is particularly important in today's smart environments, where numerous devices are connected and require stable internet access.

One of the standout features of the AP21300-12 is its advanced MU-MIMO (Multi-User, Multiple Input, Multiple Output) technology. This allows the access point to communicate with multiple devices at the same time, rather than sequentially. This results in improved bandwidth and reduced latency, making it ideal for activities such as streaming, gaming, and video conferencing. Moreover, the access point is equipped with OFDMA (Orthogonal Frequency Division Multiple Access), which enhances efficiency in high-density environments by dividing channels into smaller sub-channels, accommodating more devices and increasing overall capacity.

In terms of security, the AP21300-12 offers robust protection with WPA3 encryption, which enhances network security by providing stronger data protection and improved password security. This is crucial for users concerned about privacy and data integrity, especially in business settings where sensitive information is transmitted.

The device also features easy setup and management through the Belkin app, allowing users to monitor network performance, manage connected devices, and optimize settings through a user-friendly interface. Furthermore, with Power over Ethernet (PoE) support, the AP21300-12 can be installed in a variety of locations without the need for a separate power source, streamlining installation and reducing clutter.

Overall, the Belkin AP21300-12 is a highly versatile access point that combines cutting-edge technology with user-friendly features, making it an excellent choice for anyone looking to enhance their wireless network experience. Whether for home, office, or public spaces, the AP21300-12 delivers exceptional performance, reliability, and security, ensuring seamless connectivity for all users.
Top Page Image Contents