BenQ PE6800 Additional Information, Replacing the Lamp Contact your BenQ dealer for assistance

Page 29

Additional Information

Replacing the Lamp (Contact your BenQ dealer for assistance)

CAUTION: The lamp may be very hot. Allow the projector to cool down for 45 minutes before replacing the lamp.

1.Turn the power off and disconnect the projector from

the wall socket.

2. Use a Phillips screwdriver to loosen the screw (a) securing the lamp cover and then remove the cover from the projector.

3. Use a Phillips screwdriver to loosen the three screws (b) securing the lamp box.

4. Lift the handle so that it stands up.

5.Use the handle to slowly pull the lamp out of the

projector.

Pulling it too quickly may cause broken glass to scatter about if the bulb has broken.

Do not place the lamp in locations where water might splash on it, children can reach it, or near flammable materials.

Do not insert your hands into the box after the lamp is

 

removed. If you touch the optical component inside, it could

 

cause color unevenness and distortion of the projected

 

images.

Handle

6. Insert a new lamp. Make sure the handle is fully locked.

7. Use a Phillips screwdriver to tighten the three screws

(b) securing the lamp box.

Loose screws may cause a bad connection, which could result in malfunction.

Do not over tighten the screws.

8. Re-install the lamp cover and tighten the screw (a).

9. Turn the power on.

Power will not turn on while the lamp cover is off.

Resetting the lamp counter

 

10. On the control panel, simultaneously press and hold

Handle

 

the S, T, and POWER buttons for at least 3 seconds.

Once the lamp life exceeds 1,500 hours, the lamp will not light, even after you replace it. The lamp counter must be reset as soon as a new lamp is installed.

Do not reset the lamp life without replacing the lamp.

S button

T button

Power button

Additional Information

29

Image 29
Contents Welcome Disclaimer CopyrightTable of Contents PRO-PICTURE Menu TroubleshootingPicture Menu Display Menu FCC Statement for United State users Safety, Regulatory and Legal InformationEEC Statement for European users MIC StatementVolts AC, but could fail if power cuts or surges PrecautionsPrecautions Do not block the ventilation holes Safety InstructionsSafety Instructions Disposal Moisture CondensationAvoid Volatile Liquid Overview FeaturesShipping Contents Projector Exterior View Connector PanelFront / Upper Side Rear / Left SideControl Panel Controls and FunctionsAspect buttons Remote ControlArrows c/e/d/f Refer to page 22 for more informationConnecting to DVD players ConnectingConnecting Video Inputs Preparations Setting Up Your ProjectorAdjust the Height Ceiling Installtion for 16 9 Screen Setting Up the ScreenFloor Installation for 16 9 Screen Height aFloor Installation for 4 3 Screen Ceiling Installation for 4 3 ScreenHeight a Image Height Screen size cmZoom / Focusing Turning the Power onBasic Operation Selecting Input SourceSelecting the Video Memory Setting MenuSelecting Aspect Ratio Turning the Power Off Picture Quality AdjustmentMenu Structure MenusUse c or d to select Using the MenusPicture Menu Display Menu After Video Component 1 DVI-ANALOG/ Digital Environment MenuInstallation Menu To make the color temperature higher About color temperaturesTo make the color temperature lower PRO-PICTURE MenuMenus Replacing the Lamp Contact your BenQ dealer for assistance Resetting the lamp counterAdditional Information Indicators Problem Cause Remedy TroubleshootingOptical Characteristics SpecificationsElectrical Characteristics General CharacteristicsUnit mm Dimensions
Related manuals
Manual 33 pages 33.47 Kb

PE6800 specifications

The BenQ PE6800 is a cutting-edge projector that redefines the home theater experience, combining high-quality visuals, advanced technologies, and user-friendly features. This projector is specifically designed to cater to cinema enthusiasts, business professionals, and gamers alike, providing versatility and exceptional performance across various applications.

One of the standout features of the BenQ PE6800 is its impressive brightness. With a luminous output of up to 3000 ANSI lumens, the PE6800 can deliver vibrant images even in well-lit environments. This means that users can enjoy stunning visuals during the day or in brightly lit rooms without compromising on image quality. The projector's high contrast ratio enhances detail in darker scenes, creating a more immersive viewing experience.

The BenQ PE6800 employs DLP (Digital Light Processing) technology, which is renowned for its reliability and color accuracy. This technology ensures that colors remain consistent over time, with vivid reds, greens, and blues that bring images to life. The inclusion of a native Full HD resolution (1920x1080) further elevates the viewing experience, allowing for sharp and clear images that are sure to impress audiences.

Connectivity options are abundant in the PE6800. Equipped with diverse input ports, including HDMI, VGA, and USB, this projector is compatible with a wide range of devices such as laptops, Blu-ray players, and gaming consoles. This versatility makes it easy for users to switch between different sources seamlessly, enhancing convenience for presentations or movie nights.

The PE6800 also boasts an innovative Lens Shift feature, which allows users to adjust the vertical and horizontal position of the projector's lens without distorting the image. This capability provides flexibility in mounting options and enables users to create the optimal viewing setup without the need for additional equipment.

Additionally, the projector integrates advanced cooling technology to minimize noise during operation. This ensures that presentations remain professional and movie nights remain immersive, without distracting sounds from the projector disrupting the experience.

In conclusion, the BenQ PE6800 is an exceptional projector that offers a perfect blend of performance, versatility, and user-friendly features. Its bright output, color accuracy, and flexibility make it an ideal choice for anyone looking to enhance their visual experience, whether for entertainment or business purposes. With the PE6800, viewers can expect nothing short of excellence from their presentations and cinematic adventures.