Samsung SP-P410M specifications Setup, You can only set a position in PC mode

MENU		DESCRIPTION
Position	Adjust the screen position if it is not aligned.
		You can only set a position in <PC> mode.
Digital NR	When a dotted line is displayed or the screen shakes, you can view the picture with better visual qual-
	ity by enabling Noise Reduction.
Black Level	If the picture seems too bright, you can set a darker black level.
		Black level is automatically set in the <Video> input mode.
		You can make the manual settings shown below only when a component signal is supplied.
	• <0 IRE> : Default black level.
	• <7.5 IRE> : Set the black level so it is darker.
Film Mode	Using this function, you can set the display mode optimized for playing movies.
	<Film Mode> provides optimal display settings for movies.
		You can only set <Film Mode> in <Video> mode.
	•	<Off >-<On>
PC	Eliminates or reduces noise that causes unstable screen quality, such as screen shaking. If the noise
	is not removed using Fine Adjustment, adjust the frequency to the maximum and then perform Fine
	Adjustment again.
		Only activated in the PC environment. (component signals are not supported)
	•	<Auto Adjustment > : Used to adjust frequency and phase of PC screen automatically.
	• <Coarse > : Used to adjust frequency when vertical lines appear on PC screen.
	• <Fine> : Used to fine tune the PC screen.
	• <Reset > : Using this function, you can reset the PC menu settings to the factory default settings.
Zoom	Used to zoom in on the PC display screen.
		Only activated in the PC environment.

3-5-3. Setup

Using 3-5