Samsung NP900X3E-A02US manual Registering the TPM program, All apps, Click System Software

Using the TPM Security Device (Optional)			Using the computer	72
			Chapter 3.
Method 2	Registering the TPM program
Turn the computer on and immediately press the F4 key	1	From the Start Screen, right-click any area and select
1 several times.		All apps	in the bottom right corner. Then, click
2 After a moment, the Recovery program runs.		Infineon Security Platform Solution > Security Platform
		Management > User Settings. (with administrator authority)
		Alternatively, double-click the icon on the Taskbar and
Click System Software.		run initialization with administrator authority.

3

4

5

6

7

When a pop-up window appears to ask you to reboot the	2	The security authentication settings begin with the
system, click Yes.		Initialization Wizard. When the Initialization Wizard appears,
The system starts to reboot. After a moment, the SW Update		click Next.

program automatically runs. Connect to the network.

Select TPM Host SW and click Install.

After the program is completely installed, click Close.

Close the SW Update window and reboot your computer again.

If the status not initialized message appears, click Yes.

If you backup the emergency recovery file to an external storage device according to the instructions of the Initialization Wizard, you can use the TPM security device more safely.