Samsung SWL-2100N user manual Installation Overview, Installation Procedure of Windows

3. MagicLAN Installation For

Windows 98/ME/NT4.0/2000/XP/CE

We will explain the installation method for SWL-2100N(PC Card) .

3.1 Installation Overview

Here are some steps you will perform in establishing your wireless network connection:

1.Install the Access Point at first. AP is needed in case of Infrastructure network mode.

2.You should install the Wireless LAN Card (SWL-2100N).

3.Install the software using the Installation CD.

4.Install the network protocol(s) required to communicate on your network. Most likely you will need the TCP/IP protocol.

3.2Installation Procedure of Windows 98

Please follow the following steps one by one to install the PC card successfully.

<Method 1 - Inserting card first >

1.Insert the PC Card into the PCMCIA slot of your computer.

2.Add New Hardware Wizard appeared and the system looks for “SAMSUNG- 11Mbps WLAN Card”. Press NEXT button and check if Search for the best driver for your device(recommended) is slected and then press NEXT button . Insert the MagicLAN Installation CD into the CD-ROM drive.

3.Mark the Specify a location tap and type “E:\Drivers” right below in this tap(Where E is the CD-drive of your PC).

13