appendix
Troubleshooting
|
|
Problem | Solution |
| Check if the resolution of the output device matches with the presenter. |
| Ex) If the projector’s highest video mode is SVGA and the presenter’s output resolution has |
| been set to XGA or SXGA, no image will be displayed on the screen. |
No video is displayed. | yyCheck if the output device has set a proper input source. |
| yyCheck if brightness and focus are adjusted properly. |
| yyCheck if video cable is properly connected to output port. |
| yyCheck if the OUTPUT MODE is set to VGA / USB. |
Displayed screen is out of focus. | yyCheck if the subject is too close to the lens module. |
| yyCheck if the SDP program is installed on your PC properly. |
USB communication with the PC | yyCheck if the operating system is Windows XP or Mac OS X 10.5.8 or later. A lower |
fails. | version of Windows may cause a trouble. |
| yyFor further information, refer to the software user’s manual (for Windows / Macintosh) |
| provided with the product. |
28_ appendix