Samsung SWL-2200U user manual Installation Overview, Installation Procedure of Windows

3.MagicLAN Installation For Windows 98/ME/2000/XP/CE

We will explain the installation method for SWL-2200U(Mini USB Adapter) .

3.1 Installation Overview

Here are some steps you will perform in establishing your wireless network connection:

1.Install the Access Point at first. AP is needed in case of Infrastructure network mode.

2.You should install the Wireless LAN Card (SWL-2200U).

3.Install the software using the Installation CD.

4.Install the network protocol(s) required to communicate on your network. Most likely you will need the TCP/IP protocol.

3.2Installation Procedure of Windows 98

Please follow the following steps one by one to install the Mini USB Adapter successfully.

<Method 1 - Inserting card first >

1.Insert the Mini USB Adapter into the USB slot of your computer.

2.Add New Hardware Wizard appeared and the system looks for “USB Device”. Press NEXT button and check if Search for the best driver for your device(recommended) is slected and then press NEXT button . Insert the MagicLAN Installation CD into the CD-ROM drive.

3.Mark the Specify a location tap and type “E:\Drivers” right below in this tap(Where E is the CD-drive of your PC).

13