Samsung ML-2510 Series manual Loading paper, Using the standard tray

Page 23

Type

 

 

Guidelines

 

 

 

Transparencies

To avoid damaging the printer, use only

 

 

transparencies designed for use in laser

 

 

printers.

 

• Transparencies used in the printer must be able

 

 

to withstand 180° C (356° F), the printer’s

 

 

fusing temperature.

 

Place them on a flat surface after removing

 

 

them from the printer.

 

Do not leave them in the paper tray for long

 

 

periods of time. Dust and dirt may accumulate

 

 

on them, resulting in spotty printing.

 

To avoid smudging caused by fingerprints,

 

 

handle them carefully.

 

To avoid fading, do not expose printed

 

 

transparencies to prolonged sunlight.

 

Ensure that transparencies are not wrinkled,

 

 

curled, or have any torn edges.

 

 

 

Labels

To avoid damaging the printer, use only labels

 

 

designed for use in laser printers.

 

When selecting labels, consider the following

 

 

factors:

 

 

-

Adhesives: The adhesive material should be

 

 

 

stable at 180° C (356° F), the printer’s fusing

 

 

 

temperature.

 

 

-

Arrangement: Only use labels with no

 

 

 

exposed backing between them. Labels can

 

 

 

peel off sheets that have spaces between the

 

 

 

labels, causing serious jams.

 

 

- Curl: Prior to printing, labels must lie flat with

 

 

 

no more than 13 mm (5 inches) of curl in any

 

 

 

direction.

 

 

-

Condition: Do not use labels with wrinkles,

 

 

 

bubbles, or other indications of separation.

 

Make sure that there is no exposed adhesive

 

 

material between labels. Exposed areas can

 

 

cause labels to peel off during printing, which

 

 

can cause paper jams. Exposed adhesive can

 

 

also cause damage to printer components.

 

Do not run a sheet of labels through the printer

 

 

more than once. The adhesive backing is

 

 

designed for only a single pass through the

 

 

printer.

 

Do not use labels that are separating from the

 

 

backing sheet or are wrinkled, bubbled, or

 

 

otherwise damaged.

 

 

 

Card stock or

Do not print on print media smaller than 76 mm

custom-sized

 

(3 inches) wide or 127 mm (5 inches) long.

materials

In the software application, set margins at least

 

 

6.4 mm (0.25 inches) away from the edges of

 

 

the material.

 

 

 

 

Type

 

Guidelines

 

 

 

Preprinted

Letterhead must be printed with heat-resistant

paper

 

ink that will not melt, vaporize, or release

 

 

hazardous emissions when subjected to the

 

 

printer’s fusing temperature of 180° C (356° F)

 

 

for 0.1 second.

 

Letterhead ink must be non-flammable and

 

 

should not adversely affect printer rollers.

 

Forms and letterhead should be sealed in a

 

 

moisture-proof wrapping to prevent changes

 

 

during storage.

 

Before you load preprinted paper, such as

 

 

forms and letterhead, verify that the ink on the

 

 

paper is dry. During the fusing process, wet ink

 

 

can come off preprinted paper, reducing print

 

 

quality.

 

 

 

Loading paper

Load the print media you use for the majority of your print jobs in the tray. The tray can hold a maximum of 250 sheets of 75 g/m2 (20 lb) plain paper.

Using the standard tray

To load paper, open the tray and load paper with the side to be printed on facing up.

You can load letterhead paper with the design side face up. The top edge of the sheet with the logo should be entered into the printer first.

Notes

• If you experience problems with paper feed, place one sheet at a time in the manual tray.

You can load previously printed paper. The printed side should be facing down with an uncurled edge enter the printer first. If you experience problems with paper feed, turn the paper around. Note that the print quality is not guaranteed.

5.4 <Loading print media>

Image 23
Contents User’s Guide Page Country Customer Care Center Web Site Contact Samsung World WideContents Specifications TroubleshootingImportant Precautions and Safety Information FCC Regulations Canadian Radio Interference RegulationsIii Laser Beam Printer EU Declaration of Conformity LVD,EMCIntroduction Special featuresYou can print in Windows 98/Me/NT 4.0/2000/XP32/64 bit/2003 Features ML-2510 ML-2570 ML-2571NPrinter overview Front viewRear view Control panel overviewFinding more information Clearance space Selecting a locationPrinting a demo Basic setupUsing toner save mode Printing a demo Using toner save modeSupplied software Software overviewWindows Printer driver featuresFeature Windows Linux Macintosh System requirementsRequirements LinuxMacintosh Supported operating systems Network setupInstalling an external wired network interface Server Selecting print media Loading print mediaPrint media for manual duplex printing Type Size Dimensions Weight CapacityaType Size Weight Supported sizes of paperType Guidelines Guidelines for selecting and storing print mediaGuidelines for special print media Loading paper Using the standard trayTips on using the manual tray Using the manual trayUsing manual feed mode Knowing an output location Printing a document Canceling a print jobPrinting a document Canceling a print job Basic printingToner cartridge Ordering supplies and accessoriesAccessory How to purchaseCleaning the inside of the printer MaintenanceCleaning the printer Cleaning the outside of the printerMaintenance Expected cartridge life Maintaining the toner cartridgeRedistributing toner cartridge Toner cartridge storageReplacing the toner cartridge Items Yield Average Printing a configurationMaintenance parts Standard tray TroubleshootingClearing paper jams Paper feed areaManual tray Around the toner cartridgeTips for avoiding paper jams Paper exit areaStatus Description Troubleshooting checklistCondition Suggested solutions Understanding the LEDsSolving general printing problems Series PCL 6, or Samsung ML Settings and Printers. RightSpool Settings button Click the Samsung ML-2510Solving print quality problems Skew Condition Suggested solutions Wrinkles orMisformed CharactersCommon PostScript problems Common Windows problemsCommon Macintosh problems Common Linux problemsSpecifications and description SpecificationsPrinter specifications ECP Index Software section Contents ML-2570/2571NONLY Using Your Printer in Linux Select Typical installation for a local printer. Click Next Installing Printer SoftwareInstalling Software for Local Printing Typical InstallationCustom Installation Select the components to be installed and click Next Select Custom installation. Click NextInstalling Software for Network Printing Custom Installation Installing Printer Software in Windows Changing the Software Language Reinstalling Printer SoftwareNext Removing Printer SoftwareSelect your printer driver from the Name drop-down list Printing a DocumentPaper Orientation Printer SettingsLayout Tab Scaling Printing Paper TabSource Graphics Tab Image ModePrinter Tab Extras TabAbout Tab Using Help Using a Favorite SettingPrinting Multiple Pages on One Sheet of Paper N-Up Printing Advanced PrintingPrinting Booklets Printing PostersNone Printing on Both Sides of PaperPrinting a Reduced or Enlarged Document Fitting Your Document to a Selected Paper SizeEditing a Watermark Using WatermarksUsing an Existing Watermark Creating a WatermarkCreating a New Page Overlay Using OverlaysWhat is an Overlay? Using a Page OverlayAdvanced Using Windows PostScript DriverSelect Local Port and click New Port Setting Up a Host ComputerSetting Up a Client Computer Check the Share this printer boxUnderstanding Smart Panel Printer Setting ML-2570, 2571N olnlyTroubleshooting Guide Driver Setting Only for WindowsUsing Onscreen Help File Opening the Troubleshooting GuideUsing Printer Settings Utility Changing the Smart Panel Program SettingsGetting Started Installing the Unified Linux DriverInstalling the Unified Linux Driver Click Uninstall Uninstalling the Unified Linux DriverDouble-clickUnified Driver Configurator on the desktop Using the Unified Driver ConfiguratorPrinters Configuration Opening the Unified Driver ConfiguratorClasses Tab Configuring Printer PropertiesPorts Configuration File menu Printing from ApplicationsPrinting Files ML-2510 only Installing printer driver for MacintoshInstall the Printer driver Uninstalling the Printer driverFor a USB-connected Macintosh Setting Up the PrinterML-2570/ML-2571N only For a Network-connected MacintoshSelect your printer name and click Add PrintingPrinting a Document Changing Printer Settings Select the page order from the Layout Direction option Printing Multiple Pages on One Sheet of PaperIndex Windows 15 toner save 15 true-type option GGGGGGGGGGGGGRev.2.00

ML-2510 Series specifications

The Samsung ML-2510 Series is a compact and efficient monochrome laser printer that stands out in its class, designed primarily for small to medium-sized businesses and home offices. This series is known for its reliability, affordability, and impressive performance, making it an appealing choice for users who require high-quality printing with minimal hassle.

One of the standout features of the ML-2510 is its print speed. Capable of producing up to 24 pages per minute (ppm), this printer ensures that even high-volume printing jobs can be completed quickly, maximizing productivity. With a first-page-out time of just 8.5 seconds, users can expect minimal waiting time between jobs, making it an excellent option for busy environments.

The ML-2510 utilizes Samsung's legendary laser printing technology, which guarantees sharp text and crisp graphics thanks to a print resolution of up to 1200 x 1200 dpi. This high resolution enables users to produce professional-quality documents, reports, and presentations effortlessly. The printer's ability to handle a variety of media types, including plain paper, envelopes, and labels, enhances its versatility, allowing users to tackle various printing tasks with ease.

In addition to its impressive performance, the ML-2510 is designed with user-friendliness in mind. The printer's compact dimensions make it easy to fit into any workspace without sacrificing performance. The included Easy Printer Manager software simplifies printer management, providing users with a convenient way to monitor print jobs, manage supplies, and troubleshoot issues.

Energy efficiency is another key characteristic of the ML-2510 Series. It is Energy Star certified, ensuring that it operates with lower power consumption without compromising on performance. This efficient design not only helps to reduce energy costs but also aligns with environmentally friendly practices, making it a responsible choice for eco-conscious users.

Moreover, the ML-2510 Series boasts a generous paper handling capacity, with a 250-sheet input tray, and a single-sheet manual feed slot for specialty media. This means less frequent paper replenishment and greater convenience, especially during long printing sessions.

In summary, the Samsung ML-2510 Series is an outstanding monochrome laser printer, known for its high-speed printing, exceptional quality output, user-friendly features, and energy efficiency. Whether for busy professionals or small business environments, this printer delivers a reliable and cost-effective printing solution, ensuring that all printing needs are effectively met.