Samsung SRP - 350 specifications Connecting the Cables

Page 5

1-2. Connecting the Cables

You can connect up the three cables to the printer. They all connect to the connector panel on the back of the printer, which is shown below:

Notes : Before connecting any of the cables, make sure that both the printer and the host are turned off.

5

Image 5

Contents SRP Introduction Table of Contents Unpacking Setting Up the PrinterConnecting the Cables Connecting the Drawer Connecting the computerConnecting the Power Supply Installing or Replacing the Paper Roll Page Adjustments and Settings Panel lights Using the PrinterControl Panel Button Dip Switch Set 2 Functions DIP Switch Set 1 FunctionsParallel/USB Interface Specification Hexadecimal Dumping Self-test printing Please press the Feed button Self test0 PC437 USA, Standard Europe International Character Set USA Code Table2 PC850 Multilingual 3 PC860 Portuguese 4 PC 863 Canadian French 5 PC 865 Nordic 19 PC 858 Euro 255 Space International Character Set Can Control Commands ListControl codes Hexadecimal Function Codes Control codes Hexadecimal Function Codes Appendix Star Mode Command SummaryBEL SUB Connectors Interface Connector GND USB Interface Pin No Signal Name Assignment Function Color Pin No Signal name Direction Drawer ConnectorSpecification