BCD-1000 Series
5. Function
5-1 Rotation
This product allows display rotation to any position or angle desired by the user.
Please adhere to the following instructions during installation to prevent possible product damage and/or malfunction.
Following assembly, follow the sequence below to fix the DISPLAY in the desired position.
(a) | (b) | (c) |
(a)Lower the DISPLAY UNIT in the direction of the arrow. Rotate the
(Please refer to the product OPEN/CLOSE label.)
(b)Rotate the DISPLAY UNIT to the desired angle.
Do not rotate the DISPLAY UNIT in any direction for more that one full revolution. (Beware as the DISPLAY UNIT can be rotated continuously.)
(C)After setting the DISPLAY to the desired position, secure the
As excessive tightening of the
As shown in figure (A), make sure to fully lower the DISPLAY UNIT before rotating. Rotation of the DISPLAY UNIT when it is not fully lowered will produce a clicking sound. This sound does not indicate any product breakage and is a result of the
friction between the
English
Rev. 1.00 | - 13 - |