Disable the CD auto run feature of the CD

Select Languages

English

DVD Writers record data on the disc by applying laser light onto the surface of the disc, and therefore writing errors may occur if you use a damaged disc, for example. Be sure to eliminate the following error-causing elements before you start writing:

* The following settings are recommended for all DVD Writer:

Avoid a situation that requires multitasking, and remove turn off the screen saver.

A buffer underrun may occur if the system multitasks while the DVD Writer is writing/erasing.

Block any outside attempt to access the host PC during a writing session.

An error may occur if another user accesses the printer connected to his/her the system via the network during a writing session.

Disable the CD auto - run feature of the CD.

Inserting an auto - run-enabled CD in to another drive connected to the same system during a writing/erasing session may cause an error.

GO to Start Settings Control Panel System Hardware Device Manger CD- ROM Settings . Disable Insert AutoRun.

It is recommended that you use the image file format when you write a large number of small- sized files.

When there are a large number of small-sized files to write, the system's transfer rate drops and the Superlink feature works at a more frequent rate, resulting in lower writing quality.

If you are doing a CD-to-CD write, it is not necessary to check to see if you have available space on your hard disc beforehand.

However, in the case of image files, it is recommended that you be sure you have at least twice the amount of space needed for the data on your hard disc, as image files are copied to the hard disc before they are copied to the CD.

Use a regulation-length (46cm) or shorter E-IDE cable.

Using an E-IDE cable longer than 46cm may cause a transmission error.

Do not use more than one type of writing software.

Before you install a writing program, be sure to first uninstall existing versions of the program or other writing program(s) and reboot the system first.

(The Windows operating system may be damaged if you install the Korean version while the English version remains on the system.)

Use only the writing software provided by Samsung.

You may experience writing errors if you use with other writing programs.

The disc has bad properties data, and or there are other discs with different properties available under the same ID.

The drive's write strategy is set in a way that the drive examines to examine the disc properties and determines the optimal write conditions for those properties.

For example, many disc makers do not bother to insert property information distinguishing 50X discs from 32X discs. Since the two types of discs have the same properties data, although they actually have different properties, it is often impossible to respond to the situation with a single write strategy. In order to ensure stable writing, it is necessary to downgrade the write speed.

If discs from two different disc makers have the same write speed according to the labels, but actually have different write speeds, it is necessary to downgrade the write speed to ensure stable writing.

Samsung' s Standards for Write Speed Restriction.

Write speed is downgraded for the sake of write stability, if high-speed discs Standards 1 available in the market have particularly bad properties data, or there are

low-speed discs available under the same ID.

Speed-restricted discs go through further examination and adjustments later. If high-speed discs are available under the same ID with as low-speed

Standards 2 discs (speed restricted at present), the speed restriction is removed when the low-speed counterparts become no longer unavailable in the market under the same ID.