Samsung 151MP, 171MP manual Timer

4_E151MP171MPbody.fm Page 22 Friday, September 7, 2001 3:04 PM

Adjusting Your LCD Monitor

Table 1. Screen controls (Continued)

Main	Icon	Menus and	Function Descriptions
Menu		Sub-menus
		TIMER	The monitor system will turn off automatically if
			one of three time intervals is selected.
			Off.
			30 min.
			60 min.
			120 min.
		Closed	Enable or disable closed caption feature and set
		Caption	the appearance of closed caption text.
		(US only)	• On/Off

•Caption/Text

•Channel 1/2

•Field 1/2

•Box/Shadow

V- Chip	See " V- Chip " on page 25	~ 26.
	NOTE: If you forgot V-Chip	Password

•Press and hold the "Audio" button on the front of the monitor for 10 seconds. The screen will blink once as the password is reset to the original state.

•The initial password of V-Chip is ‘0000’.

*According to our R&D Lab test result, "Channel auto program" usually takes around 3 minutes to scan 61 channels. The scanning can be longer or shorter depending on the number of channels and the video source whether the video source is from cable or air.

*Upon completion of "Channel auto program", the result of the channel search is stored in designated internal memory. Each found channel is indexed into that memory and the channel indices are used as a look up table. In other words, when a user changes the channel, the monitor refers to the look up table to find the appropriate channel freqency instead of performing physical frequency scanning which gives a lot slower tuning result. In rare cases, "Channel auto program" may miss a channel due to weak signals or for other reasons. To add a channel, please enter the channel number by using the numeric key pads on the remote controller, then use "Fine Tune" menu in the "TV Setup" menu from OSD. When you finish fine tunning the channel you want to add, select "Save".

English 22