Samsung HM080HI specifications Technical Specifications, SW-252B

Specifications

SAMSUNG continually strives to improve its products. Both the design specifications and these user instructions are thus subject to change without notice.

Technical Specifications

ITEM		SW-252B
		CD-RW
DISC	Disc types	CD-DA(Audio), CD-ROM, CD-ROM XA, CD-Plus, CD-Extra,
	supported	Photo-CD(Single, Multi-session), Video CD ready, Enhanced CD,
	in read mode	CD-I/FMV, CD-R, CD-RW, CD-TEXT
	Erasing disc types	CD-RW
	Disc diameter	120 mm or 80 mm
DRIVE	Data transfer rate	Recording CD-R:	600 KB/sec. (4X),
PERFORMANCE			1200 KB/sec. (8X),
			1800 KB/sec. (12X),
			2400 KB/sec. (16X),
			3600 KB/sec. (24X),
			4800 KB/sec. (32X),
			6000 KB/sec. (40X),
			7200 KB/sec. (48X),
			7800 KB/sec. (52X)
		CD-RW :
		Ultra Speed Writing DISC:	3600 KB/sec. (24X)
		High Speed Writing DISC:	1500 KB/sec. (10X)
		Low Speed Writing DISC:	600 KB/sec. (4X)
		Reading CD-ROM:	CAV 52X
		CD-R:	CAV 40X
		CD-RW:	CAV 40X
		PIO Mode 4:16.6MB/sec
		Multiword DMA mode 2 : 16.6MB/sec
		UDMA mode 2 : 33.3MB/sec
	Access time	110ms
	(Random)
	Data Buffer	Bulk Type : 2MB
		Retail Pack : 8MB
	Laser	Semiconductor laser
	Slide mechanism	Stepping motor
	Spindle motor	Brushless motor
	Load mechanism	Tray. DC motor (Soft Eject). Horizontal/Vertical.
ERROR RATE		Mode 1: 1 block/10-12 , Mode 2: 1 block/10-9
FRONT PANEL	Eject button	Auto eject or Auto inject
	Indicator	Play / Read (GREEN) Record (RED), Operation LED
	Headphone output	Stereo mini-jack (Ø 3.6 mm) 0.65 ± 20% (vrms) 33 ohm
	Volume control	Dial type
REAR PANEL	Required power	+5 VDC: 1.5 A (Peak), +12 VDC: 1.5 A (Peak)
	Interface connector	ATAPI BUS (E-IDE)
	Audio output	Line out 0.75V ± 20% (vrms) : 47Kohm
	Jumper block	Molex 70203 or other compatible models
OPERATING	Operations	Temperature: 5~45°C Humidity: 10~80%
ENVIRONMENT	Storage	Temperature: -25~60°C Humidity: 10~90%
GENERAL	Dimensions	148.2 (W) x 42 (H) x 184 (D) mm (including bezel)
	Net weight	780 g
RELIABILITY	MTBF	125,000 POH(Duty 20%)

"Design and specifications are subject to change without prior notice."