Samsung SW-248B specifications Problem, When recording Nero or Easy CD Creator

Page 17

Troubleshooting

Problem

The CD-R/RW drive is not detected by the computer.

After installing the CD-R/RW drive, the PC gets slower.

The CD-R/RW drive is not recognized by MS-DOS.

The CD-R/RW drive is not detected by Windows.

No sound is heard from an audio CD.

A CD is not read or is read too slowly.

The disc compartment will not open.

When the MPEG software plays a Video CD, the pictures are not regular and the running speed is too slow.

The Disc is not in message is displayed even though a disc has been inserted.

The CD-R/RW drive is not detected after it is connected to a sound card.

IN CD has the Formatted Disc Eject function.

When recording NERO or Easy CD Creator,

it will be recorded not on a CD but a form of image file.

The Recorder cannot recognize the disc.

Meaning / Solution

Check that the power, audio and IDE cables are correctly connected to the computer.

Change the IDE cable and reconnect it to the computer. Preferably, connect a second IDE cable to the CD-R/RW drive in master mode.

Check the position of the jumper in the master/slave select terminal.

Reinstall the device driver or update it with the latest version by downloading it from the Samsung Web site.

-Http://samsung-ODD.com

-Http://samsung.com

This case may occur when there is a Windows installation problem; reinstall Windows.

Check whether the audio cable is correctly connected to the sound output terminal on the CD-R/RW drive and the sound card CD-IN terminal.

Check that the sound card is operational.

Adjust the volume control.

Run the CD player supplied with Windows or your sound card. You can listen to the CD by connecting headphones to the appropriate connector.

If you have installed the appropriate player, such as Microsoft Windows Media Player, you can adjust the volume using the headphone volume control on the drive front panel.

If you select DIGITAL at CD Audio Play in Media Player of Windows ME/XP, the earphone does not appear in the Digital Mode.

Check whether the CD is of good quality and clean it, if necessary.

Check that the power cable is correctly connected.

Power off and disconnect the PC.

Insert a pin or unfolded paper clip in the emergency hole and push firmly until the disc compartment opens.

Adjust the size of the replay screen.

After checking the display resolution, adjust it, if necessary.

The computer may not recognize the disc if you start playback too quickly after inserting the disc. Open and close the disc compartment and try again.

Clean the disc and try again.

The interface mode of the sound card is AT-BUS.

You must therefore connect the CD-R/RW drive to the IDE port on the PC mother board, rather than to the sound card, or install an E- IDE compatible sound card.

Right-click the mouse on TRAY ICON (right side of the menu bar at the bottom of the monitor) and then select "Eject" to take the CD out.

Select the drive where the disc is inserted from Windows Explorer. Right-click the mouse and select "Eject" to take the CD out.

This seems to occur when you select the recording function as the system selects "Image Recorder" instead of SW-248.

In this case, select a recorder from the menu items at the upper part of NERO or Easy CD Creator and then select SW-248 from the Recorder Selection window.

When installing the recording software, try not to install the software before the ROM drive as this makes the Image Recorder selected.

Use the firmware automatic upgrade function available at the ODD service website to download

the newest firmware and then reinstall the recording software which is included in the bundle.

-Http://samsung-ODD.com

-www.samsungelectronics.com/odd

Image 17
Contents Index Notational Safety PrecautionsInstallation Handle with caution to prevent damage from external shock While OperatingOther Front IntroductionRear Connecting the Cables SetupInstalling the CD-R/RW Drive Connecting the E-IDE cable Connecting the power cableWhen using one E-IDE cable Master Drive Choose the MA JumperMaster Drive Choose the MA Jumper b Connecting the audio cable from a sound cardInstalling the Device Driver Installing the CD Record UtilitySetting Up the Device Driver Add the DEVICE=C\SAMSUNG\SSCDROM.SYS \DSSCD000/V entryStoring and Cleaning Your Discs Using the DriveUsing the CD-R/RW Drive Description Upgrading the Firmware Flash MemorySystem Requirements Hard Drive TroubleshootingNetwork Drive CD-ROM DriveTerm Description About DMA Installation General DMA Installation Guide Windows 98/MeDMA Setting Recommended Disc TypesRecorder cannot recognize the disc Meaning / Solution ProblemWhen recording Nero or Easy CD Creator SW-248B SpecificationsTechnical Specifications

SW-248B specifications

The Samsung SW-248B is a remarkable optical disc drive that has been designed to cater to a wide range of multimedia needs. As a versatile 24x DVD writer, it offers users the ability to both read and write various disc formats with exceptional speed and efficiency. This drive is particularly well-suited for home computing, professional workstations, and multimedia applications, making it a great addition to any digital setup.

One of the standout features of the SW-248B is its impressive writing capability. It can burn standard DVD+R and DVD-R discs at speeds of up to 24x, which drastically reduces the time needed to create backups or store large files. Additionally, the drive supports DVD-RW, DVD+RW, and DVD-RAM formats, offering the flexibility to use rewritable media. For CD enthusiasts, the SW-248B offers CD writing speeds of up to 48x, ensuring quick and easy backup of songs and other CD-based content.

The technology behind the SW-248B incorporates advanced error correction and reliable writing strategies, ensuring a high level of data integrity and successful burns every time. This is particularly important for users who need to reliably preserve important files and projects. With its SmartBuffer technology, the drive minimizes buffer underrun errors, promoting uninterrupted writing processes and enhancing overall performance.

In terms of compatibility, the SW-248B is designed to work seamlessly with various operating systems, including Windows and most common Linux distributions. The drive also supports various multimedia software applications, making it easy for users to create audio CDs, burn data backups, or produce video DVDs.

The sleek and functional design of the Samsung SW-248B ensures it fits well into most computer cases. Its SATA interface provides high-speed data transfer rates, further enhancing its performance. Additionally, the drive's energy-efficient design helps to reduce overall power consumption, making it a more eco-friendly choice for users concerned with their energy footprint.

Ultimately, the Samsung SW-248B represents an ideal solution for those in need of a reliable and efficient optical disc drive. With its extensive list of features, advanced technologies, and user-friendly characteristics, it meets the demands of both everyday users and professionals alike, making data storage and retrieval an effortless experience.