Connecting the Cables Recommended Disc Types

Using the Drive

Connecting the Cables

Recommended Disc Types

CD-RMCC, RITEK, CMC, SKC, BEALL, PRODISK, MAXELL, ACER, MPO, FUJI, TAIYO YUDEN, TDK, GIGA, PLASMON

CD-RWCD-RW : RICOH , RITEK , MCC , PRODISK , SKC , CMC, ACER (1X - 4X)

H/S-RW : RICOH , CMC , RITEK , ACER , PRODISK , SKC (10X)

U/S RW : MCC , RITEK, MITSUBISHI (24X, 32X)

General DMA Installation Guide Windows 98/Me

Important!

Please read the entire DMA installation guide before installing your CD-R/RW drive.

About DMA Installation

For stable writing performance at high speeds, Installation of DMA transfer mode for E-IDE/ATAPI interface is strongly recommended. We recommend DMA mode for fast writing.

DMA Setting

Before you install your CD-R/RW drive, we recommend to set DMA to enabled on your PC system. See the following procedure to set DMA transfer mode in windows oprerating system.

(Windows 98/ME)

+	Click on START	+	Select your CD-R/RW drive
+	Click on Settings	+	Click on the Properties button
+	Select Control Panel	+	Click on the Settings tab
+ Select the System Icon		+	Check the DMA checkbox to enables DMA.
+ Select the Device Manager panel		+	Click OK
	in System Properties	+	Restart your PC
		+	Restart your PC

+Expand the CD-ROM icon

Windows 2000/XP

Select the DMA mode by selecting

[Start > Setting > Control Panel > System > Device Manager > IDEATA/ATAPI Controller > Default/Assistant IDE Channel Advanced Information]