Cambridge SoundWorks Home Theater System specifications Rear satellites may be installed

The rear satellites may be installed

on their convenient floor stands. While listening, the stands should be positioned to the left and right of your listening position (see Diagram G).

The Floor Stands are small enough to be stowed underneath a desk when not in use. See page 7 for floor stand assembly instructions.

Larger work surfaces can accommodate both front and surround pairs of satellites on their stands. Try the extreme corners of a desk using the Desktop Stands (see Diagram H).

Also, you may attach the rear satellites under a desktop or at the sides of a desk using the hook and loop fasteners (see Diagram I).

After you positioned the rear satellites, use the test sound to make sure each speaker can be heard clearly.

The Subwoofer. The subwoofer’s optimum position is on the floor against the wall under the computer desk. The nearer the subwoofer is to the corner of the room, the stronger its maximum bass output will be. We strongly

recommend placing the subwoofer on the floor (see Diagram J).

Leave at least 8 cm (3 inches) of space between the subwoofer face and a wall. Small objects in front of, but not touching the subwoofer (table legs, for instance) will have no effect on its sound

If you have no available floor space, the subwoofer can be placed on a shelf, desktop or other sites, but its maximum output will be reduced. The subwoofer is mag- netically shielded, allowing place- ment near computers or monitors.

HIJ

5