Samsung 1100PPLUS manual Safety Instructions

Page 4

Safety Instructions

1

2

3

4

5

6

7

8

Before connecting the AC power cord to the DC adapter outlet, make sure the voltage designa- tion of the DC adapter corresponds to the local electrical supply.

Never insert anything metallic into the monitor openings. Doing so may create the danger of electric shock.

To avoid electric shock, never touch the inside of the monitor. Only a qualified technician should open the monitor’s case.

Never use your monitor if the power cord has been damaged. Do not allow anything to rest on the power cord, and keep the cord away from areas where people can trip over it.

Be sure to hold the plug, not the cord, when disconnecting the monitor from an electric socket.

Openings in the monitor cabinet are provided for ventilation. To prevent overheating, these openings should not be blocked or covered. Also, avoid using the monitor on a bed, sofa, rug, or other soft surface. Doing so may block the ventilation openings in the bottom of the cabinet. If you put the monitor in a bookcase or some other enclosed space, be sure to provide adequate ventilation.

Put your monitor in a location with low humidity and a minimum of dust.

Do not expose the monitor to rain or use it near water (In kitchens, near swimming pools, etc.). If the monitor accidentally gets wet, unplug it and contact an authorized dealer immediately. You can clean the monitor with a damp cloth when necessary, but be sure to unplug the monitor first.

9

10

11

Place the monitor on a solid surface and treat it carefully. The screen is made of glass and can be damaged if dropped or hit sharply.

Locate your monitor near an easily accessible AC outlet.

If your monitor does not operate normally – in particular, if there are any unusual sounds or smells coming from it – unplug it immediately and contact an authorized dealer or service center.

12

13

14

High temperature can cause problems. Don’t use your monitor in direct sunlight, and keep it away from heaters, stoves, fireplaces, and other sources of heat.

Unplug the monitor when it is going to be left unused for an extended period of time.

Unplug your monitor from the AC outlet before any service.

CAUTION

RISK OF ELECRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

2

Image 4
Contents SyncMaster 1100p SyncMaster 1100p Page Contents Safety Instructions Manual Unpacking Your MonitorMonitor and Stand Setting up Your Monitor Connecting Your MonitorPlug and Play Installing the Video DriverWindows 2000 and Windows Self-Test Feature Check Stfc WindowsVersion 4.00.950A Version 4.00.950BCheck Signal Cable Getting HelpWarm-up Time MonitorUser Controls Adjusting Your MonitorInformation i button Automatic Save Direct-Access FeatureOSD Lock/Unlock User defined timing mode Factory preset timingsInformation Displayed along the bottomPosition Menu FeaturesPosition Size ZoomSize ZoomParallel/Rotation Pincushion/TrapezoidParallel/Rotation Pincushion/TrapezoidLinearity PinbalancePinbalance Button to adjust Color temperatureColor Color screen is displayed Use Button orClear Moiré FocusClear moiré FocusConvergence DegaussConvergence DegaussRecall User-DeleteRecall Selection screen PushSync. Input Type Video Input LevelSync. Input Type Use Button or Button to selectPosition adjustment screen Use Menu PositionSUB or BNC Menu screen is displayedMenu Duration LanguagesMenu Duration LanguagesPowerSaver AppendixTroubleshooting Troubleshooting problemsSpecifications SpecificationsPin D-SUB connector Pin AssignmentsBNC Connectors Display ModesIndex