3-2 Standard Signal Mode Table
This product delivers the best picture quality when viewed under the optimal resolution setting. The optimal resolution is dependent on the screen size.
Therefore, the visual quality will be degraded if the optimal resolution is not set for the panel size. It is recommended setting the resolution to the optimal resolution of the product.
If the signal from the PC is one of the following standard signal modes, the screen is set automatically. However, if the signal from the PC is not one of the following signal modes, a blank screen may be displayed or only the Power LED may be turned on. Therefore, configure it as follows referring to the User Manual of the graphics card.
S19A300N
DISPLAY MODE | HORIZONTAL | VERTICAL | PIXEL CLOCK (MHZ) | SYNC POLARITY (H/ | |
FREQUENCY (KHZ) | FREQUENCY (HZ) | V) | |||
|
| ||||
|
|
|
|
| |
IBM, 640 x 350 | 31.469 | 70.086 | 25.175 | +/- | |
|
|
|
|
| |
IBM, 720 x 400 | 31.469 | 70.087 | 28.322 | ||
|
|
|
|
| |
MAC, 640 x 480 | 35.000 | 66.667 | 30.240 | ||
|
|
|
|
| |
MAC, 832 x 624 | 49.726 | 74.551 | 57.284 | ||
|
|
|
|
| |
VESA, 640 x 480 | 31.469 | 59.940 | 25.175 | ||
|
|
|
|
| |
VESA, 640 x 480 | 37.861 | 72.809 | 31.500 | ||
|
|
|
|
| |
VESA, 640 x 480 | 37.500 | 75.000 | 31.500 | ||
|
|
|
|
| |
VESA, 800 x 600 | 35.156 | 56.250 | 36.000 | +/+ | |
|
|
|
|
| |
VESA, 800 x 600 | 37.879 | 60.317 | 40.000 | +/+ | |
|
|
|
|
| |
VESA, 800 x 600 | 48.077 | 72.188 | 50.000 | +/+ | |
|
|
|
|
| |
VESA, 800 x 600 | 46.875 | 75.000 | 49.500 | +/+ | |
|
|
|
|
| |
VESA, 1024 x 768 | 48.363 | 60.004 | 65.000 | ||
|
|
|
|
| |
VESA, 1024 x 768 | 56.476 | 70.069 | 75.000 | ||
|
|
|
|
| |
VESA, 1024 x 768 | 60.023 | 75.029 | 78.750 | +/+ | |
|
|
|
|
| |
VESA, 1366 x 768 | 47.712 | 59.790 | 85.500 | +/+ | |
|
|
|
|
|
Horizontal Frequency
The time taken to scan one line from the
Vertical Frequency
A panel must display the same picture on the screen tens of times every second so that humans can see the picture. This frequency is called the vertical frequency. The vertical frequency is represented in Hz.
Using the product |