SETUP&RESET
Menu |
| Description |
|
| |
| Use this function to restore the visual quality and color settings to the factory defaults. | |
Reset | <No> - <Yes> | |
| • | |
Select a language for the OSD.
Language
The selected language is only applied to the product OSD. This setting does not affect the other functions of the PC.
Only works in Windows 7 and recommended when using multiple monitors.
•<Off>
When<Off>is selected, the<MagicReturn>function is turned off.
•<On>
When<On>is selected, the<MagicReturn>function is turned on.
| • The function is available in Windows 7 only.When use the other OS,it is recommended to |
MagicReturn | set this function to <Off>. |
|
•This function is not available for analog signal input.
•This function is not available when <PC/AV Mode> is set to <AV>.
•This function may be unavailable for some graphics cards. These graphics cards don't support the international EDID standard.(DDWG DVI Standard) It is recommended to set this function to <Off>.
•Press and hold down the ▼ key for 5 seconds while the <Check Signal Cable> OSD is displayed,<MagicReturn> will be automatically set to <Off>.
This function provides user a low power mode which is realized by lowering the current of the display panel.
•<100%>
When <100%> is selected, the power consumption is 100% of default setting.
•<75%>
When <75%> is selected, the power consumption is about 75% of default setting.
MagicEco
•<50%>
When <50%> is selected, the power consumption is about 50% of default setting.
•<Power Saving Off>
When <Power Saving Off> is selected, the function is turned Off .
This menu is unavailable when <MagicBright> is set to <Dynamic Contrast> mode.
Using the product |