SETUP&RESET
MENU | DESCRIPTION |
|
|
Reset | Use this function to restore the visual quality and color settings to the factory defaults. |
| • <No> - <Yes> |
|
|
Language | Select a language for the OSD. |
|
| The selected language is only applied to the product OSD. This setting does not affect the other |
|
| functions of the PC. |
|
| |
MagicReturn | The function is available in Windows7 system. The monitor can not be recognized when it is turned | |
| off. To recognize it, you must turn it on. | |
| • | <Off> |
|
| When <Off>is selected, the <MagicReturn> function is turned off. |
| • | <On> |
|
| When <On>is selected, the <MagicReturn> function is turned on. |
|
| • This function does not support Analog mode. |
|
| • This function is only available for PC mode of DVI input. |
|
| • This function is not available in Windows2000/XP/Vista system. It is suggested to select |
|
| <Off>. |
|
| • This function is not available for graphics card ATI X600. It is suggested to select <Off>. |
|
| • When the <Check Signal Cable> OSD is shown,user can keep pressing the ▼ Key for 5 |
|
| seconds,then <MagicReturn> is set to <Off> automatically. |
|
| • The <MagicReturn> function may not work properly with graphics cards that are not fully |
|
| compliant with DVI specifications. |
|
| • If this is the case, please contact the appropriate graphics card manufacturer or set the |
|
| <MagicReturn> function to <Off>. |
|
| |
MagicEco | This function provides user a low power mode which is realized by lowering the current of the display | |
| panel. | |
| • | <100%> |
|
| When <100%> is selected, the power consumption is 100% of Default Setting. |
| • | <75%> |
|
| When <75%> is selected, the power consumption is 75% of Default Setting. |
| • | <50%> |
|
| When <50%> is selected, the power consumption is 50% of Default Setting. |
| • | <Power Saving Off> |
|
| When <Power Saving Off> is selected, the function is turned Off . |
Using the product |