Samsung 950p Plus, 950P, 750p, 950p, 950p plus manual Troubleshooting problems

Page 25

Appendix

Troubleshooting

Before calling for service, check the information in this section to see if you can remedy any problems yourself.

If you do need assistance, please call the phone number on the warranty card, the phone number on the back cover of this manual, or contact your dealer.

Table 2. Troubleshooting problems

Symptom	Corrective Actions

There is no screen image	• Check to see that both the monitor and the computer
	are plugged in and turned on.

“No Connection,	• Check the signal cable connections between the
Check Signal Cable” appears	computer and the monitor.

“Sync. Out of Range” appears	• Check the maximum resolution and the frequency on
	the video port of your computer.
	• Compare these values with the data in the Display
	Modes Timing chart, on page 27.

The image is too light or too dark	• Adjust the Brightness or Contrast settings.

The image is too large or too small	• Adjust the Size settings.

The colors are distorted with dark or	• Activate the Degauss feature.
shadowed areas

The power indicator is amber, amber/	• The monitor is using its power management system.
green blinking or amber blinking	Check the power management utility on your computer

You need the monitor driver software	• You can download the driver from the internet at
	http: //www.samsungelectronics. com/support/
	downloads/monitor/index.html

English

23

Image 25

Contents SyncMaster 750p SyncMaster 950p Page English ContentsSafety Instructions Manual Unpacking Your MonitorMonitor and Stand Connecting Your Monitor Setting up Your MonitorPlug and Play Installing the Video DriverWindows 2000 and Windows Windows Self-Test Feature Check StfcWarm-up Time Getting HelpUser Controls Adjusting Your MonitorAutomatic Save Direct-Access FeatureOSD Lock/Unlock Information Position Menu FeaturesZoom SizeParallel/Rotation Or button to adjust the rotation settingPincushion/Trapezoid Push the button or button to select Parallel/RotationLinearity PinbalanceColor control ColorWith the menu off, push Button Push Button or Button until Color screen is displayedClear Moirè Or button to adjust vertical moirèFocus Push the button or button to select Degauss DegaussAfter a few seconds, the degauss main menu will return User-Delete RecallPush and hold Exit button for at least 5 seconds Video Input Level Sync. Input TypePush the button or button to select Menu Position Menu PositionLanguages Menu DurationAppendix PowerSaverTroubleshooting problems TroubleshootingSpecifications 750p Specifications950p 30 kHz to 96 kHz Pin Assignments Pin D-SUB connectorPreset timing modes BNC ConnectorsOSD Lock/Unlock IndexRegulatory Information Thailand