Samsung 955MB manual Clean

Page 6

Notational

Power

Installation

Clean

Other

Main > Safety Instructions > Clean

When cleaning the monitor case or the surface of the CDT, wipe with a slightly moistened, soft fabric.

Do not clean Flat monitor with water. Use a water-diluted mild detergent.

(Some detergents contain significant amounts of alcohol-based solvents, which can damage (color change) or crack the monitor case. The antiglare/anti-static surface coating on the CDT may also be affected.)

Dilute the detergent (1:10 ratio) with water before using.

Do not spray detergent directly on the monitor.

Use the recommended detergent with a smooth cloth.

?You can prevent the coated CDT from being damaged or the monitor cabinet from being dissolved, cracked or discolored.

?You can buy a recommended detergent at any Samsung Service Center.

If the connector between the plug and the pin is dusty or dirty, clean it properly with a dry cloth.

?A dirty connector can cause an electric shock or fire.

Do not set a glass of water, chemicals or any small metal objects on the monitor.

?This may cause damage, electric shock or a fire.

?If a foreign substance gets into the monitor, disconnect the plug and then contact a service center.

Image 6

Contents SyncMaster 955MB Main Index Notational Power Do not use a damaged or loose plugUse only a properly grounded plug and receptacle Place the monitor on a flat and stable surface Do not drop the monitor when moving itDo not cover the vents on the monitor cabinet Set down the monitor carefullyClean Other Do not place any heavy objects on the monitorDo not use or store inflammable substances near the monitor Never insert anything metallic into the monitor openings Keep the monitor away from any magnetic substancesUsers Guide Driver Installation CD Monitor and Stand Power Cord Quick Setup GuideWarranty Card UnpackingPower button FrontRear Power port BottomConnecting Your Monitor Click Windows ME Driver Installing the Monitor DriverWindows ME Windows XP/2000Page Microsoft Windows XP Operating System Page How to install Click Start , Setting , Control Panel Microsoft Windows NT Operating System Linux Operating SystemBase Installation Removing the Base On-Screen Display No images on the screen. I cannot turn on the monitor Check Signal Cable onCheck List Can you see No ConnectionScreen shows strange colors or just black and white Screen suddenly has become unbalancedTips for Highlight Zone Question General Q & aSelf-Test Feature Check Judging the monitors working condition General Picture TubePowerSaver State Normal Operation Power-off Mode EPA/ENERGYPreset Timing Modes Horizontal FrequencyVertical Frequency Service BrazilEspaña United KingdomChile Sonda S.A Interlace and Non-Interlace Methods ResolutionDot Pitch Plug & PlayUser Information RegulatoryFCC Information User Instructions Declaration of conformity for products Marked with FCC LogoIC Compliance Notice MPR II ComplianceEuropean Notice Europe only Why do we have environmentally-labelled monitors? What does labelling involve?Environmental Requirements Cadmium Why do we have environmentally labelled computers?Lead MercuryTCO Development Environmental requirements Flame retardantsLead Congratulations Natural Color Software Program How to install the Natural Color softwareHow to delete the Natural Color software program Natural ColorAuthority