Samsung 932NW manual Installation Instructions

I cannot see the	Have you locked	Unlock the OSD by pressing the [MENU / ] button for at
On Screen	the On Screen	least 5 seconds.
Display.	Display (OSD)
	Menu to prevent
	changes?
The screen shows	Is the screen	Check the signal cable connection.
strange colors or	displaying only one	Make sure the video card is fully inserted in it's slot.
just black and	color as if looking at
white.	the screen through
	a cellophane
	paper?
	Have the screen	Reboot the computer.
	colors become
	strange after
	running a program
	or due to a crash
	between
	applications?
	Has the video card	Set the video card by referring to the video card manual.
	been set properly?
The screen	Have you changed	Adjust screen image position and size using the OSD.
suddenly has	the video card or
become	the driver?
unbalanced.
	Have you adjusted	Adjust the resolution and frequency at the video card.
	the resolution or	(Refer to the Preset Timing Modes).
	frequency to the
	monitor?
	The screen can be unbalanced due to the cycle of the video card signals.
	Readjust Position by referring to the OSD.
The screen is out	Have you adjusted	Adjust the resolution and frequency of the video card.
of focus or OSD	the resolution or	(Refer to the Preset Timing Modes).
cannot be	frequency on the
adjusted.	monitor?
LED is blinking but	Is the frequency	Adjust the frequency properly by referring to the video
no images on the	properly adjusted	card manual and the Preset Timing Modes.
screen.	when checking the	(The maximum frequency per resolution may differ from
	Display Timing on	product to product.)
	the menu?
There are only 16	Have the Windows	Windows XP :
colors shown on	colors been set	Set the resolution in the Control Panel → Appearance
the screen. The	properly?	and Themes → Display → Settings.
screen colors have
changed after		Windows ME/2000 :
changing the video		Set the resolution in the Control Panel → Display →
card.		Settings.
	Has the video card	Set the video card by referring to the video card manual.
	been set properly?
There is a	Have you installed	Install the monitor driver according to the Driver
message that	the monitor driver?	Installation Instructions.
reads
"Unrecognized	See the video card	Install the monitor driver according to the Driver
monitor, Plug &
	manual to see if the	Installation Instructions.
Play (VESA DDC)
	Plug & Play (VESA
monitor found".
	DDC) function can
	be supported.
Check when	MagicTune™	* To check whether your PC is available for MagicTune™
MagicTune™ does	feature is found only	feature, follow the steps below (When Windows is XP);
not function	on PC (VGA) with
properly.	Window OS that	Control Panel → Performance and Maintenance →
	supports Plug and	System → Hardware → Device Manager → Monitors →
	Play.	After deleting Plug and Play monitor, find 'Plug and Play