Control Panel Display, Settings | Samsung 940BE, 940FN, 940N, 740B

There are only 16 colors shown on the screen.

The screen colors have changed after changing the video card.

There is a message that reads "Unrecognized monitor, Plug & Play (VESA DDC) monitor found".

	resolution may differ from product to
	product.)
Have the Windows colors	Windows ME/2000/XP:
been set properly?	Set the colors properly at the
	Control Panel Display
	Settings.
Has the video card been	Set the video card by referring to the
set properly?	video card manual.
Have you installed the	Install the monitor driver according
monitor driver?	to the Driver Installation Instructions.
See the video card	Install the monitor driver according
manual to see if the Plug	to the Driver Installation Instructions.

&Play (VESA DDC) function can be supported.

Check when MagicTune™ does not function properly.

MagicTune™ doesn't work properly.

MagicTune™ feature is found only on PC (VGA) with Window OS that supports Plug and Play.

Have you changed your PC or video graphic card?

*To check whether your PC is available for MagicTune™ feature, follow the

steps below (When Windows is XP);

Control Panel -> Performance and Maintenance -> System -> Hardware -> Device Manager -> Monitors -> After deleting Plug and Play monitor, find 'Plug and Play monitor' by searching new Hardware.

MagicTune™ is an additional software for the monitor. Some graphic cards may not support your monitor. When you have a problem with the graphic card, visit our website to check the compatible graphic card list provided. http://www.samsung.com/monitor/magictune

Download the latest program. The program can be downloaded http://www.samsung.com/monitor/magictune.

Visit the MagicTune™ website and download the installation software for MagicTune™ MAC.

Check the following items if there is trouble with the monitor.

1.Check if the power cord and the video cables are properly connected to the computer.

2.Check if the computer beeps more than 3 times when booting.

(If it does, request an after-service for the main board of the computer.)

3.If you installed a new video card or if you assembled the PC, check if the installed the adapter (video) driver and the monitor driver.

4.Check if the scanning ratio of the video screen is set at 56 Hz ~ 75 Hz. (Do not exceed 75 Hz when using the maximum resolution.)

5.If you have problems in installing the adapter (video) driver, boot the computer in Safe Mode,

remove the Display Adapter at the "Control Panel System Device Administrator" and then reboot the computer to reinstall the adapter (video) driver.

If problems repeatedly occur, contact an authorized service center.

Control Panel Display

Settings.