Samsung 931MP manual Problems, Items to check

Page 42

Picture rolls vertically.

Image is not clear. Picture is blurred.

Picture image is unstable and vibrates.

Ghost images are shown in the picture.

The image is too light or too dark

Screen color is inconsistent.

Color image is distorted with dark shadows.

White color is poor.

Power Indicator blinks green.

Screen is blank and power indicator light is steady green or blinks every 0.5 or 1 seconds

zCompare these values with the data in the Preset Timing Modes Chart.

zCheck if the signal cable is securely connected. Connect it again securely.

(Refer to Connecting to a Computer)

zRun Frequency Coarse and Fine tuning.

zTurn on again after removing all accessories (video extension cable, etc.)

zSet resolution and frequency to the recommended ranges.

zCheck if the resolution and frequency set for the computer video card falls in the range supported by the monitor.

If not, reset them referring to the current Information under the monitor menu and Preset Timing Modes.

zAdjust the Brightness and Contrast. (Refer to the Brightness, Contrast)

zAdjust color using Custom under OSD Color Adjustment menu.

zThe monitor is currently saving the changes made in settings to the OSD memory.

zThe monitor is using its power management system.

zPress a key on the keyboard

3. Problems related to Audio

Problems related to audio signals and their solutions are listed below.

Problems

 

Solutions

 

 

 

No sound

 

z Ensure that the audio cable is firmly connected to both the

 

 

audio-in port on your monitor and the audio-out port on your

 

 

sound card.

 

 

(Refer to the Connecting the Monitor)

zCheck the volume level. (Refer to the Volume)

Sound level is too low.

 

z

Check the volume level.

 

 

 

(Refer to the Volume)

 

 

z

If the volume is still too low after turning the control to its

 

 

 

maximum, check the volume control on the computer sound

 

 

 

card or software program.

 

 

 

 

Sound is too high pitched or too low pitched

zAdjust the Treble and Bass to appropriate level.

4. Problems related to Remote Control

Problems related to the remote control and their solutions are listed.

Problems

The remote control buttons do not respond.

Items to check

zCheck the battery polarities (+/-).

zCheck if the batteries have been exhausted.

zCheck if the power is on.

zCheck if the power cord is securely connected.

Image 42
Contents SyncMaster 931MP Do not use a damaged or loose plug Insert the power plug firmly so that it does not come loose Do not drop the monitor when moving itUse only a properly grounded plug and receptacle Set down the monitor carefully Keep any heating devices away from the power cableDo not place the product on the floor Do not place the monitor face downDo not spray water or detergent directly on the monitor Do not remove cover or back Do not cover the vents on the monitor cabinet Never insert anything metallic into the monitor openingsKeep all power adapters apart Keep power adapter away from any other heat sourceRemove and discard vinyl bag from power adapter before use When moving the monitor, turn off and unplug the power cord To vibrationsMonitor Manual Quick Setup Guide CableSub Cable Power Cord Audio CableMenu Auto ENTER/FM Radio Source Menu PIP Available in PC/DVI Mode OnlyMagicBright Available in PC/DVI Mode Only Enter / FM RadioDVI/PC Extrgb ComponentFM ANT / ANT Scart is mainly used in EuropeStill PowerMute TTX/MIX Menu Enter FM Radio DUAL/MTSMute 20. S.MODE Sound Mode Dual / MTSThis function is available only in Korea Connecting to a Computer Connecting to a Macintosh Connecting AV DevicesConnecting TV Is weak signal causing poor reception? When using an interior antenna terminalWhen using an outdoor antenna To connect the RF cable to the antenna input terminalConnecting Headphone Folding the baseInstall a Vesa base Removing the baseWindows XP/2000 Windows MEClick Windows ME Driver Click Windows XP/2000 DriverMicrosoft Windows XP Operating System Page How to install Click Start , Setting , Control Panel Microsoft Windows NT Operating System Linux Operating SystemNatural Color Software Program How to install the Natural Color software Description Play/Stop Source Direct button on the remote control is Source buttonOSD ListPC / DVI Mode Direct button on the remote control is Source button SizeDirect button on the remote control is Size button Position PIP ON/ OffAvailable in PC Mode Only Coarse Direct button on the remote control is M/B button EntertainAvailable in PC Mode Only Cool / Normal / Warm / Custom Description Play/StopDirect button on the remote control is P.MODE button TV / Ext. / AV / S-Video / Component ModeSettings DynamicBBE Description Play/Stop Auto Manual StoreAdd / Delete ProgramOn / Off English, 한국어Caption Off / On Channel 1 Mode Caption / TextReset Password Field 1Page Self-Test Feature Check Not Supported ModeNot Optimum Mode Maintenance and CleaningDisplay Adapter Driver Problems Solutions Problems Items to checkQuestion AnswerPower Supply ResolutionInput Signal, Terminated Signal CableDimensions WxDxH/ Weight Power ConsumptionPower Saving State Normal Operation Power saving mode Power offBroadcasting Systems Sync PolarityBroadcasting Systems CountriesEcuadorBroadcasting Systems Countries Horizontal FrequencyVertical Frequency Chile Sonda S.A Australia BrazilCanada ColombiaHungary FranceGermany ItalySouth Africa PeruPortugal SWEDEN/DENMARK/NORWAY/FINLANDCatv Btsc VHF/UHFDVD EiajClass B Product Information Image Retention Free