Check List

supported by the monitor.

3. Display Adapter Driver

Display adapter refers to the computer video card driver.

If the adapter is not properly set, you cannot adjust resolution, frequency or color and you cannot install the monitor driver.

1.Checking Adapter Driver

Click Start Settings Control Panel Display Settings Advanced Adapter.

If "Default" or a wrong product model is indicated, it means that the adapter driver is not properly installed. Install the adapter driver again according to the information provided by the computer or video card manufacturers.

2.Installing Adapter Driver

The instructions given below are for general circumstances.

For specific issues, contact the relevant computer or video card manufacturers.

1)Click Start Settings Control Panel Display Settings Advanced

Adapter Update Driver Next Display a list of the known drivers for this device so

that I can choose a specific driver Next Have Disk (Insert Video Card Driver diskette) OK Next Next Finish.

2)In case you have Adapter Driver Setup file on your computer:

Run Setup.exe or Install.exe, which is found in the Adapter Driver Setup file.

4.Maintenance and Cleaning

1.Maintaining the Monitor Case.

Clean with a soft cloth after disconnecting the power cord.

zDo not use benzene, thinner or other flammable substances, or a wet cloth.

zWe recommend a Samsung cleansing agent is used to prevent damage to the screen.

2.Maintaining the Flat Panel Display Screen. Clean with a soft cloth (cotton flannel) smoothly.

zNever use acetone, benzene or thinner.

(They may cause flaws or deformation of the screen surface.)

zThe user will be required to pay costs and related expenses for repair of damages caused by him/her.

5.Symptoms and Recommended Actions

A monitor recreates visual signals received from the computer. Therefore, if there is trouble with the computer or the video card, this can cause the monitor to become blank, have poor coloring, noise, Video mode not supported, etc. In this case, first check the SOURCE of the problem, and then contact a service center or your dealer.

1.Check if the power cord and the video cables are properly connected to the computer.

2.Check if the computer beeps more than 3 times when booting.

(If it does, request an after-service for the main board of the computer.)

3.If you installed a new video card or if you assembled the PC, check if you installed the adapter(video) driver and the monitor driver.

4.Check if the scanning ratio of the video screen is set at 56 Hz ~ 75 Hz. (Do not exceed 60 Hz when using the maximum resolution.)

5.If you have problems in installing the adapter (video) driver, boot the computer in Safe Mode, remove the Display Adapter at the "Control Panel, System, Device Administrator" and then reboot the computer to reinstall the adapter (video) driver.

The following table lists possible problems and their solutions. Before calling for service, check

932MW, 2032MW specifications

The Samsung 2032MW and 932MW are two innovative products that showcase Samsung's commitment to advanced technology and energy efficiency. These models are designed primarily for the modern consumer looking for high-performance devices with cutting-edge features.

The 2032MW is a microwave that combines sleek design with advanced cooking technologies. It boasts a powerful wattage of 2032, ensuring faster cooking times and more evenly cooked food. The smart inverter technology allows for precise temperature control, enabling users to defrost, reheat, or cook with confidence. The microwave also features a touch control panel for intuitive operation, and a spacious interior that can accommodate large dishes, making it an ideal choice for busy families and individuals alike.

In addition to its cooking capabilities, the 2032MW is equipped with several smart features. It connects seamlessly with Samsung's SmartThings app, enabling users to monitor and control the microwave remotely. This feature adds convenience, allowing users to start or stop the microwave from their smartphone, ensuring meals are ready when they are. An additional highlight is the built-in voice assistant compatibility which enhances usability, especially for hands-free operation.

On the other hand, the 932MW focuses on energy efficiency and environmentally friendly cooking. With a lower wattage of 932, this microwave is designed for users who prioritize energy conservation without sacrificing performance. It includes an eco mode that reduces power consumption during standby, aligning with the growing trend towards sustainability in the kitchen.

The 932MW does not skimp on features either; it offers multiple pre-set cooking modes that make meal preparation straightforward, whether it's baking, grilling, or steaming. Its compact design is perfect for smaller kitchens or apartments, making it a versatile choice for those with limited space.

Both the 2032MW and 932MW integrate advanced ceramic enamel interiors, making cleaning effortless while providing a hygienic cooking environment. Their user-friendly interfaces and modern aesthetics ensure that they not only perform excellently but also enhance the kitchen's overall look.

Overall, the Samsung 2032MW and 932MW represent the pinnacle of microwave technology, combining performance, energy efficiency, and smart features to cater to the needs of today's consumers. Whether one opts for the powerful 2032MW or the eco-friendly 932MW, both models offer exceptional value and sophistication, marking Samsung as a leader in kitchen appliance innovation.