Samsung 591v Attaching the Base, Removing the Base, Click Windows ME Driver, Windows XP/2000

Attaching the Base

1.Place the monitor upside-down on a flat work surface.

2.Align the tabs on the base with the corresponding slots on the bottom of the monitor.

3.Press the base onto the monitor until the tabs are fully engaged in the slots.

4.Push the base toward the front of the monitor until the release latch clicks into the locked position.

*Do not bend the snap.

Removing the Base

5.Squeeze and pull up on the release latch on the base.

6.Push the base toward the back of the monitor and lift up to remove the base.

The base will align with the monitor slots in only one position.

When prompted by the operating system for the monitor driver, insert the CD-ROM included with this monitor. Driver installation is slightly different from one operating system to another. Follow the directions appropriate for the operating system you have.

Prepare a blank disk and download the driver program file at the Internet web site shown here.

zInternet web site : http://www.samsung.com/ (Worldwide) http://www.samsungusa.com/monitor (USA) http://www.sec.co.kr/monitor (Korea) http://www.samsungmonitor.com.cn/ (China)

Windows ME

1.Insert CD into the CD-ROM drive.

2.Click "Windows ME Driver".

3.Choose your monitor model in the model list, then click the "OK" button.

4. Click the "Install" button in the "Warning" window.

5. Monitor driver installation is completed.

Windows XP/2000