|
| Control Panel → Performance and |
|
| Maintenance → System → Hardware → |
|
| Device Manager → Monitors → After |
|
| deleting Plug and Play monitor, find 'Plug |
|
| and Play monitor' by searching new |
|
| Hardware. |
|
| MagicTune™ is an additional software for |
|
| the monitor. Some graphic cards may not |
|
| support your monitor. When you have a |
|
| problem with the graphic card, visit our |
|
| website to check the compatible graphic |
|
| card list provided. |
|
| http://www.samsung.com/monitor/magictune |
MagicTune™ doesn't | Have you changed your | Download the latest program. The program |
work properly. | PC or video graphic | can be downloaded |
| card? | http://www.samsung.com/monitor/magictune. |
| Did you install the | Reboot the computer after installing the |
| program? | program for the first time. If a copy of the |
|
| program is already installed, remove it, |
|
| reboot the computer, and then install the |
|
| program again. You need to reboot the |
|
| computer for it to operate normally after |
|
| installing or removing the program. |
Visit the MagicTune™ website and download the installation software for MagicTune™ MAC.
Check the following items if there is trouble with the monitor.
1.Check if the power cord and the video cables are properly connected to the computer.
2.Check if the computer beeps more than 3 times when booting.
(If it does, request an
3.If you installed a new video card or if you assembled the PC, check if the installed adapter (video) driver and the monitor driver.
4.Check if the scanning ratio of the video screen is set at 50Hz ~ 160Hz . (Do not exceed 65Hz when using the maximum resolution.)
5.If you have problems in installing the adapter (video) driver, boot the computer in Safe Mode, remove the Display Adapter at the "Control Panel→System→Device Administrator" and then reboot the computer to reinstall the adapter (video) driver.
If problems repeatedly occur, contact an authorized service center.
Q & A
Question
How can I change the frequency?
Answer
Frequency can be changed by reconfiguring the video card.
Note that video card support can vary, depending on the version of the driver used. (Refer to the computer or the video card manual for details.)
How can I adjust the resolution? Windows ME/XP/2000 : Set the resolution at the Control
| Panel→Display→Settings. |
| * Contact the video card manufacturer for details. |
How can I set the Power Saving | Windows ME/XP/2000 : Set the function at |
function? | computer or the screen saver. (Refer to Windows/Computer |
| Manual). |