Samsung 900S manual Symptom Chek List Solution

User’s Manual 40

Troubleshooting

Chek List

Note Before calling for service, check the information in this section to see if you can solve the problem yourself. If you do need assistance, please call the phone number on the warranty card, the phone number on

the Information section or contact your dealer.

Symptom	Chek List	Solution
	Is the power cord connected	Check the power cord connection and
	properly?	supply.
	Can you see "No Connection, Check	Check the signal cable connection.
	Signal Cable" on the screen?
	If the power is on, reboot the	If the initial screen (the login screen)
		appears, boot the computer in the
	computer to see the initial
		applicable mode (the safe mode for
	screen(the login screen),
		Windows 95/98/ME/XP/2000)
	which can be seen.
		and then change the frequency of
		the video card.(Refer to the Preset
		Display Modes)
		Note: If the initial screen (the login
		screen) does not appear,
		contact a service center or
		your dealer.
	Can you see "Sync. Out of Range"	You can see this message when the
	on the screen?	signal from the video card exceeds the
		maximum resolution and frequency that
		the monitor can properly handle.
		Adjust the maximum resolution and
		frequency applicable to the monitor.
	There is no image on the screen.Is	The monitor is in PowerSave mode.
	the power indicator on the monitor	Press a key on the keyboard or move
	blinking at 1 second intervals?
		the mouse to activate the monitor and
		restore the image on the screen.
	Have you locked the On Screen	Unlock the OSD by pressing the MENU
	Display (OSD) Menu to prevent
		button for at least 10 seconds.
	changes?