Samsung 913TM, 910TM, 713BM, 710TM manual Symptom Check List

Visit the video card maker's homepage and download and install the latest driver. For more information about the video card, contact the card manufacturer.

To ensure normal operation, please restart your system.

An error occurs when the system is not restarted after installing MagicTune. (This is for Win98SE and WinMe only.)

Restart the system before use.

For the best performance of MagicTune, adjust to the optimal resolution. Refer to the User Guide for the optimal resolution.

If you do not adjust to the optimal resolution and perform Color Calibration, the monitor cannot be adjusted to the optimal condition.

Refer to the manual for the optimal resolution.

This video card does not support MagicTune.

Please install a new video card driver.

An error occurs when the video card driver is not installed properly.

This happens when the current video card list is not displayed normally. You can check this from Start > Setup > System > Hardware > Device Manager > Display Adapter.

Visit the video card manufacturer's homepage and download and install the latest driver.

For more information about the video card, contact the card manufacturer.

As the Highlight program uses the communication lines,

please exit the Highlight program before you can access MagicTune.

Some of Samsung CDT monitors support the Highlight feature.

When using both the Highlight feature and MagicTune simultaneously, conflicts occur, which cause errors.

Make sure to turn OFF Highlight before using MagicTune.

Troubleshooting

zMagicTune may not work in case monitor is replaced or driver of graphic card is updated while MagicTune is operating. If so, please restart the system.

Symptom	Check List
Check when	MagicTune feature is found
MagicTune does not	only on PC (VGA) with
function properly.	Window OS that supports
	Plug and Play.

Solutions

*To check whether your PC is available for MagicTune feature, follow the

steps below (When Windows is XP);

Control Panel -> Performance and Maintenance -> System -> Hardware -> Device Manager -> Monitors -> After deleting Plug and Play monitor, find 'Plug and Play monitor' by searching new Hardware.

MagicTune is an additional software for the monitor. Some graphic cards may not support your monitor. When you have a problem with