Color Tone
Color Control
Gamma
:This function is to adjust the vertical size of the MagicZone.
The tone of the color can be changed and one of four modes can be selected - Cool, Normal, Warm and Custom.
(Not available in MagicColor mode of Full and Intelligent.)
Adjusts individual R,G,B color balance.
(Not available in MagicColor mode of Full and Intelligent.)
Select one of three
zMode 1 : Shows normal gamma
zMode 2 : Shows higher gamma(brighter)
zMode 3 : Shows lower gamma(darker)
Image
Menu
Coarse
Fine
Sharpness
H-Position
DescriptionPlay/Stop
Removes noise such as vertical stripes. Coarse adjustment may move the screen image area. You may relocate it to the center using the horizontal control menu. (Available in analog mode only)
Removes noise such as horizontal stripes. If the noise persists even after fine tuning, repeat it after adjusting the frequency (clock speed).
(Available in analog mode only)
Changes the clearance of image.
(Not available in MagicColor mode of Full and Intelligent.)
Changes the horizontal position of the monitor's entire display.
(Available in analog mode only)
Changes the vertical position of the monitor's entire display.